

Six-legged robot
- Size
- 80 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 31
- Pads
- 87
- Tracks, vias
- 228, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Oct 2024
- Updated
- 22 Mar 2025
Overview
BMU is an open-source printed circuit board by Bismarck420, from the Bismarck420/Stickbug repository on GitHub. It is a 2-layer board of 80 × 17.8 mm with 30 parts on 31 nets, routed with 228 tracks and 16 vias.
It is built around the DW01A, HY2213-BB3A and TP4056, with the AO3401A, BUK7880-55A-VB and CDBA340-HF among its other parts. Its parts include 8 resistors, 3 capacitors, 3 ICs, 3 diodes and 3 transistors.
Main components
7DW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementHY2213-BB3A
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2uA 4.19V Balancing IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSHYCON TechBattery ManagementTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBUK7880-55A-VB
SOT-223-55℃~+150℃ 1 N-channel 100pF 120pF 2.5V 22nC@10V 4.5A 60V 76mΩ@10V、85mΩ@4.5V 810pF N-Channel SOT-223 MOSFETs ROHSVBsemi ElecMOSFETsCDBA340-HF
SMA(DO-214AC)-50℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 70A SMA(DO-214AC) Schottky Diodes ROHSComchipSchottky DiodesFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | gate1, hsup1, n1g1, n2g1, n2s1 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R2, R5, R7 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R4, R6 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 1 | 1.2k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | Rpull1 |
| 1 | 10µ | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BUK7880-55A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q3 |
| 1 | CDBA340-HF | Diode_SMD:D_SMA | D4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | DW01A | DW01A:SOT95P280X145-6N | U1 |
| 1 | FS8205A | FS8205A:SOT-23-6L_TCP | Q1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | HY2213-BB3A | HY2213-BB3A:SOT95P280X140-6N | IC1 |
| 1 | TP4056 | TP4056:SOP127P600X175-9N | U2 |
| 1 | TestPoint | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | green | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | yellow | LED_SMD:LED_1206_3216Metric | D2 |
More from Bismarck420/Stickbug
1- 2 layers141.5 × 87.5 mm

Similar boards
- 2 layers35 × 100 mm

WalkieTalkie
GuzziFlipFlops/ESP32-Walkie-Talkie
An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with
66 parts7MIT - 2 layers150 × 40 mm

- 4 layers90 × 98 mm

Convention badge pcb v2
BrandonFors/convention_pcb_badge
Design for a custom pcb badge for opensauce convention and maybe other conventions in the future.
57 parts - 2 layers151 × 95 mm

Deneme
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
143 parts - 2 layers50 × 35 mm

Controller module
InputBlackBoxOutput/INGAME
Virtual reality controller for playing FPS games
73 partsMIT - 2 layers62 × 6 mm

TableLight
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
72 partsMIT - 4 layers32.4 × 40.2 mm

Smartwatch
Pedro-Seixas/Smartwatch
A custom-designed smartwatch built around the ESP32-S3, combining BLE connectivity, a rectangular touch display, recharge capability, IMU and temperature sensors. Designed from the ground up in KiCad.
55 partsMIT - 2 layers21.3 × 52.5 mm

Questions
How big is the BMU PCB?
It measures 80 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMU use?
30 parts, built around the DW01A, HY2213-BB3A, TP4056 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMU KiCad files?
From the Bismarck420/Stickbug repository on GitHub, at the commit this page was made from: the board is Hardware/BMU/BMU.kicad_pcb and its schematic Hardware/BMU/BMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMU design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bismarck420 before reusing the design.