
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro

This repo contains the schematic and PCB for the control module. The firmware for the control module can be found here: https://github.com/BenMartens15/reviveride-control-module-firmware
Control module pcb is an open-source printed circuit board by BenMartens15, from the BenMartens15/reviveride-control-module-pcb repository on GitHub. It is a 4-layer board of 58.3 × 75.9 mm with 83 parts on 69 nets, routed with 447 tracks and 141 vias.
It is built around the ESP32-S3-WROOM-1-N8, MPQ4436GRE-AEC1-P and MIC2039BYM6-TR, with the RT9080-33GJ5 among its other parts. Its parts include 32 capacitors, 27 resistors, 13 ICs, 5 connectors and 1 diode. It belongs with the ESP32 boards of this library.
ReviveRide was developed as a capstone project for the Computer Engineering Technology program at Conestoga College. The goal of ReviveRide is to bring features found on modern vehicles to older vehicles. The project provides a dash camera, backup camera, head unit touchscreen with Android Auto, blind spot object detection, and remote start in an all-in-one, easy to install kit.
The control module is responsible for providing power to every component in the system when the car is turned on. It is also responsible for receiving the remote start signal from the key fob and switching voltages to the ignition system to start the car.
This repo contains the schematic and PCB for the control module. The firmware for the control module can be found here: https://github.com/BenMartens15/reviveride-control-module-firmware
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 47u | Capacitor_SMD:C_1206_3216Metric | C2A, C2B, C7, C9, C11, C13, C15 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R9, R12, R15, R18, R21 |
| 5 | 100u | Capacitor_SMD:C_1206_3216Metric | C8, C10, C12, C14, C16 |
| 5 | 18k | Resistor_SMD:R_0603_1608Metric | R10, R13, R16, R19, R22 |
| 5 | 1n | Capacitor_SMD:C_0603_1608Metric | C17, C19, C21, C23, C25 |
| 5 | 220n | Capacitor_SMD:C_0603_1608Metric | C18, C20, C22, C24, C26 |
| 5 | ITS4200SSJDXUMA1 | ITS4200SSJDXUMA1:PG-DSO-8-24_INF | U9, U10, U11, U12, U13 |
| 5 | MIC2039BYM6-TR | MIC2039BYM6_TR:SOT-23-6_M6_MCH | U4, U5, U6, U7, U8 |
| 4 | 287 | Resistor_SMD:R_0603_1608Metric | R11, R14, R17, R20 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R23, R25 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1C, C1D |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C1A, C1B |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R24, R26 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 0.22u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 145 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 19.1K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 3.3u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 4.7u | PA4342_472NLT:IND_PA4342_PUL | L1 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 62K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | EN | Button_Switch_SMD:SW_SPST_TL3305B | SW1 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | Ignition Outputs | 1776275-5:TE_1776275-5 | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MPQ4436GRE-AEC1-P | MPQ4436GRE-AEC1-Z:QFN-4x4_MPQ4436-AEC1_MNP | U2 |
| 1 | Power Input | 1776275-2:TE_1776275-2 | J5 |
| 1 | Power Outputs | 1-1776275-2:TE_1-1776275-2 | J3 |
| 1 | Programming Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | Programming Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | RT9080-33GJ5 | RT9080_33GJ5:TSOT-23-5_RIT | U3 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
The 81 most common of 83 parts.

bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro


vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

bitaxeorg/bitaxeMax
bitaxe based on the BM1397 ASIC from the Antminer S17

WantClueTechnologies/BitForge-Nano
This project presents a fully open-source Bitcoin mining hardware platform, designed for transparency, modularity, and extensibility.

ayan4m1/esp-chungus
Chungus is an ESP32-S3 development board created as a learning exercise in KiCad.


It measures 58.3 × 75.9 mm and has 4 copper layers, 4.69 mm thick.
83 parts, built around the ESP32-S3-WROOM-1-N8, MPQ4436GRE-AEC1-P, MIC2039BYM6-TR and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BenMartens15/reviveride-control-module-pcb repository on GitHub, at the commit this page was made from: the board is control-module-pcb.kicad_pcb and its schematic ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BenMartens15 before reusing the design.