
Epdiy v7
vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

Hardware design files for EPDiy: https://github.com/vroland/epdiy.
V7-kaleido is an open-source printed circuit board by vroland, from the vroland/epdiy-hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 138.1 × 104.6 mm with 140 parts on 154 nets, routed with 1,751 tracks and 278 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N8 and RY3730, with the THD2528-11SD-GF, PCA9535PW and PCF8563T/5 among its other parts. Its parts include 46 capacitors, 34 resistors, 12 ICs, 12 diodes and 12 connectors. It belongs with the ESP32 boards of this library.
This V7 controller iteration is based on the ESP32S3 for 8 bit panels. Highlights of the new board include:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R4, R6, R10, R11, R12, R14, R15, R16, R32, R33 |
| 10 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C7, C8, C11, C24, C26, C28, C31 |
| 9 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C9, C12, C16, C19, C32, C43, C45 |
| 9 | MBR0540 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D11, D12 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C15, C22, C23, C29, C30, C39, C40, C42 |
| 5 | 1uF/25V | Capacitor_SMD:C_0805_2012Metric | C35, C37, C38, C44, C46 |
| 4 | 47k | Resistor_SMD:R_0603_1608Metric | R26, R27, R28, R29 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C13, C14, C18 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R30, R31 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C20, C25 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric | C21, C41 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R19, R23 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R8 |
| 2 | 1uF/50V | Capacitor_SMD:C_1206_3216Metric | C34, C36 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C27, C33 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6, C10 |
| 2 | 25Ω | Resistor_SMD:R_0603_1608Metric | R13, R17 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R25, R34 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R7 |
| 2 | Conn_01x08_Pin | footprint:CONN8_FH34SRJ_HIR | J4, J9 |
| 2 | L | footprint:SWPA5040S282MT | L3, L4 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | RY3730 | footprint:SOT-23-6_RY3730_Led_PWM | U6, U12 |
| 1 | +15V | TestPoint:TestPoint_Pad_D2.5mm | TP4 |
| 1 | +22V | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | -15V | TestPoint:TestPoint_Pad_D2.5mm | TP2 |
| 1 | -20V | TestPoint:TestPoint_Pad_D2.5mm | TP3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H | C17 |
| 1 | 10k/3380K | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 1N5817 | Diode_SMD:D_SOD-123 | D10 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_NR-40xx_HandSoldering | L2 |
| 1 | 32.768K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.7uH | Inductor_SMD:L_Taiyo-Yuden_NR-50xx_HandSoldering | L1 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 52.3k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 6.8k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AXT-310124 | footprint:AXT310124 | J10 |
| 1 | C1 | TestPoint:TestPoint_Pad_D2.5mm | TP6 |
| 1 | C2 | TestPoint:TestPoint_Pad_D2.5mm | TP7 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U9 |
| 1 | CONN_BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | ED060XC5 | epaper-breakout:X05A20H34G | U10 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U8 |
| 1 | ESP_HDR | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J7 |
| 1 | ESP_XTR_HDR | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | EXTENSION_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J2 |
| 1 | FH34SRJ-6S-0.5SH_99_ | footprint:FH34SRJ6S05SH99_Mirrored | J6 |
| 1 | LED GREEN | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | LED RED | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | PCA9535PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | RSL48_4P4X4P4 | footprint:TPS651851RSLR | U3 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | RTCINT_GPIO1 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP2 |
| 1 | R_Pack04 | footprint:RESN_F392JTCE_UNR_SD-pullup | RN1 |
| 1 | SM04B-SRSS-TB_LF__SN_ | footprint:QWIIC_SM04B-SRSS-TB_LFSN_ | J12 |
| 1 | THD2528-11SD-GF | footprint:THD252811SDGF | J11 |
| 1 | TP4056 | epaper-breakout:TP4056_SOP-8-PP | U11 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USB_HDR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | VBAT_GPIO2 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1 |
| 1 | VCOM | TestPoint:TestPoint_Pad_D2.5mm | TP5 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U5 |
The 139 most common of 140 parts.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.


martinberlin/Sharp-LV
This KiCad board aims to be a low consumption driver for SHARP LCDs w/optional touch. MCU: Nordic RF52 (not tested) | ESP32S3 buy one in Tindie before sending to production

ardiloot/dif-pressure-meter
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).




nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors

martinberlin/H-pico-raw-eink
H means Hardware. This PCB is just a prototype to test parallel eink signals with Raspberry PICO
It measures 138.1 × 104.6 mm and has 4 copper layers, 1.6 mm thick.
140 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, RY3730 and THD2528-11SD-GF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vroland/epdiy-hardware repository on GitHub, at the commit this page was made from: the board is versions/v7-kaleido-34/v7-kaleido.kicad_pcb and its schematic adapters/33_pin_to_ED133UT2/33_pin_to_ED133UT2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).