
Kicad main
johannesstrueber/dots
DOTS eurorack module pcb schematics and code ATMega328 based

Motor control code for milling machine power feed unit. Uses Platform IO with the Arduino library
Mill Power Feed PCB is an open-source printed circuit board by ben-jacobson, from the ben-jacobson/mill_power_feed repository on GitHub. It is a 2-layer board of 71 × 47 mm with 69 parts on 55 nets, routed with 25 tracks and 4 vias.
It is built around the ATMEGA328P-AU and AMS1117-5.0. Its parts include 24 resistors, 23 connectors, 16 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Motor control code for milling machine power feed unit. Uses Platform IO with the Arduino library
Requirements:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C8, C9, C10, C11, C12, C13, C14, C15 |
| 7 | Conn_01x03_Male | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J3, J8, J10, J12, J14, J16, J23 |
| 6 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R10, R11, R12, R19, R20 |
| 6 | 160R | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R8, R9 |
| 6 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J17, J18, J19, J20, J21, J22 |
| 5 | 120R | Resistor_SMD:R_0603_1608Metric | R13, R15, R17, R21, R23 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R14, R16, R18, R22, R24 |
| 5 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J7, J9, J11, J13, J15 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 270R | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 10uF | Capacitor_SMD:C_Elec_4x5.4 | C1 |
| 1 | 16MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | GRNLED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LIMIT_BREAKOUT | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | REDLED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |

johannesstrueber/dots
DOTS eurorack module pcb schematics and code ATMega328 based

jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

justraven/FlightController
Flight Controller PCB Design, Utilized ATMega328P. Compatible with MultiWii


M-S-Ali/raven-i-sentinel
6S - 24V - 20A Battery Management System (BMS) based on TI BQ76925 and Microchip Atmega328P.

wszeto9/2_679_PCB
PCB Project for 2.679 which is then used in my 2.007 Competition Robot

7bwiiza/Robot-creation
Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB

BartekOrchowski/MiniSumoAVR
This project is a MiniSumo robot developed during a workshop organized by the KoNaR student scientific association.
It measures 71 × 47 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the ATMEGA328P-AU and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ben-jacobson/mill_power_feed repository on GitHub, at the commit this page was made from: the board is Mill Power Feed PCB/Mill Power Feed PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ben-jacobson before reusing the design.