2 layers25 × 25 mm
2 layers25 × 25 mm
Collection of various SMT breakout boards
- Size
- 25 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 11
- Pads
- 62
- Tracks, vias
- 103, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Feb 2022
- Updated
- 2 Dec 2023
Overview
ADS1219 is an open-source printed circuit board by becauseimclever, from the becauseimclever/BreakoutBoards repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 25 mm with 20 parts on 11 nets, routed with 103 tracks and 16 vias.
It is built around the ADS1219IPW. Its parts include 4 connectors, 3 capacitors, 3 resistors and 2 ICs.
Main components
1README
README.mdBreakoutBoards
Collection of various SMT breakout boards
ADS112C04IPWR
Texas Instruments 16-bit 4 channel ADC using the I²C bus.
https://www.ti.com/store/ti/en/p/product/?p=ADS112C04IPWR
DRV2605LDGSR
Texas Instruments motor driver for haptic feedback. 2V~5.5V I²C
https://www.ti.com/store/ti/en/p/product/?p=DRV2605LDGSR
PCM1780DBQR
Texas Instruments 24-bit 2 channel DAC using the I²S bus.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 0.1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J3 |
| 1 | 0.1μf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | ADS1219IPW | ADS1219:ADS1219IPW | U1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | DRDY | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | NCP51460SN33T1G | NCP51460SN33T1G:NCP51460SN33T1G | U2 |
More from becauseimclever/BreakoutBoards
6- 2 layers25 × 25 mm
- 2 layers25 × 25 mm
- 2 layers25 × 25 mm
- 2 layers22.9 × 22.9 mm
- 2 layers20.3 × 27.5 mm
Similar boards
- 2 layers78.1 × 50.2 mm
- 4 layers15.3 × 45.8 mm
ExtendedRangeSupply
esl-epfl/CHEEP-boards
This chewing gum board is designed to be an extended-range voltage supply + current measurement circuit, intended for connection to the main board through the male pin headers to both sides.
46 parts2 - 2 layers
- 2 layers63.5 × 82.6 mm
- 4 layers60 × 60 mm
ADS1219 Header low cost V2
giusmos/ADS1219-PCB
PCB schematic and layout for 24bit ADC 1219 from TI
41 parts - 2 layers139 × 45 mm
Soil Power Sensor
jlab-sensing/ENTS-node-hardware
Schematics and design for soil MFC voltage and current sensing
72 parts - 4 layers45 × 95 mm
- 2 layers44 × 26 mm
Questions
How big is the ADS1219 PCB?
It measures 25 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADS1219 use?
20 parts, built around the ADS1219IPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADS1219 KiCad files?
From the becauseimclever/BreakoutBoards repository on GitHub, at the commit this page was made from: the board is ADS1219/ADS1219.kicad_pcb and its schematic ADS1219/ADS1219.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADS1219 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).