4 layers140.5 × 58.6 mm
4 layers60 × 60 mm
ADS1219 Header low cost V2
giusmos/ADS1219-PCBPCB schematic and layout for 24bit ADC 1219 from TI
- Size
- 60 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 25
- Pads
- 141
- Tracks, vias
- 209, 256
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Dec 2024
- Updated
- 28 Nov 2025
Overview
ADS1219 Header low cost V2 is an open-source printed circuit board by giusmos, from the giusmos/ADS1219-PCB repository on GitHub. It is a 4-layer board of 60 × 60 mm with 41 parts on 25 nets, routed with 209 tracks and 256 vias.
It is built around the ADS1219IPW and ADM7150ARDZ-3.3-R7. Its parts include 18 capacitors, 12 resistors, 4 connectors and 2 ICs.
Main components
2
ADS1219IPW
TSSOP-16-40℃~+125℃ 1.024MHz 15LSB 1kHz 2 2.3V~5.5V 24 315uA Built-in Built-in I2C Multiplexers、Power-on reset、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
ADM7150ARDZ-3.3-R7
SOIC-8-EP-40℃~+125℃ 1 16V 1uVrms 3.3V 800mA 94dB@(100kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Noise bypass terminal、Built-in soft start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdADS1219-PCB
PCB schematic and layout for 24bit ADC 1219 from TI
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.01uF, 10V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C8, C10 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R15, R16, R17, R18 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R13, R14 |
| 5 | 10uF, 25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C29, C30, C31 |
| 4 | 1uF, 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C32, C33 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 0.1uF, 10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C11, C12 |
| 1 | 1725708 | 1725708:1725708 | J4 |
| 1 | ADM7150ARDZ-3.3-R7 | ADM7150ARDZ-3_3-R7:SOIC127P600X175-9N | IC2 |
| 1 | ADS1219IPW | ADS1219IPW:SOP65P640X120-16N | IC1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
Similar boards
- 2 layers280 × 205 mm
- 2 layers78.1 × 50.2 mm
- 4 layers15.3 × 45.8 mm
ExtendedRangeSupply
esl-epfl/CHEEP-boards
This chewing gum board is designed to be an extended-range voltage supply + current measurement circuit, intended for connection to the main board through the male pin headers to both sides.
46 parts2 - 2 layers25 × 25 mm
- 2 layers
- 2 layers63.5 × 82.6 mm
- 2 layers139 × 45 mm
Soil Power Sensor
jlab-sensing/ENTS-node-hardware
Schematics and design for soil MFC voltage and current sensing
72 parts
Questions
How big is the ADS1219 Header low cost V2 PCB?
It measures 60 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ADS1219 Header low cost V2 use?
41 parts, built around the ADS1219IPW and ADM7150ARDZ-3.3-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADS1219 Header low cost V2 KiCad files?
From the giusmos/ADS1219-PCB repository on GitHub, at the commit this page was made from: the board is Schematich and PCB/ADS1219_Header_low_cost_V2.kicad_pcb and its schematic Schematich and PCB/ADS1219_Header_low_cost_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADS1219 Header low cost V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask giusmos before reusing the design.