

SimpleTeensyFCU
- Size
- 45 × 95 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 64
- Nets
- 87
- Pads
- 288
- Tracks, vias
- 744, 278
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Jun 2025
- Updated
- 9 Jul 2026
Overview
SimpleTeensyFCU is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/SimpleTeensyFCU repository on GitHub. It is a 4-layer board of 45 × 95 mm with 64 parts on 87 nets, routed with 744 tracks and 278 vias.
It is built around the TEENSY 4.1, ADS1219IPW and AP63205WU, with the MS5611-01BA03, BNO085 and AO3401A among its other parts. Its parts include 17 resistors, 12 connectors, 10 capacitors, 7 ICs and 2 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
9TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedADS1219IPW
TSSOP-16-40℃~+125℃ 1.024MHz 15LSB 1kHz 2 2.3V~5.5V 24 315uA Built-in Built-in I2C Multiplexers、Power-on reset、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersMS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure SensorsBNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsCIGW252010GL4R7MNE
10081.4A 1.7A 180mΩ 4.7uH ±20% 1008 Power Inductors ROHSSamsung Electro-MechanicsPower InductorsSI-60005-F
插件Ethernet Connectors / Modular Connectors (RJ45 RJ11)Bel FuseSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | JST_XH_B3B-XH-AM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R12, R13, R14, R17 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C54, C55, C56, C57, C58 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 180k | Resistor_SMD:R_0402_1005Metric | R10, R16, R21 |
| 3 | 56k | Resistor_SMD:R_0402_1005Metric | R15, R18, R22 |
| 3 | PYRO 2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8, J9, J10 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R20 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 3.3k | Resistor_SMD:R_0402_1005Metric | R9, R19 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x03_MountingPin | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | J4, J6 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 150R | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | ADS1219IPW | PCM_SparkFun-Semiconductor-Standard:TSSOP-16 | U2 |
| 1 | AMASS_XT30 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | BATT1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U18 |
| 1 | BNO085 | AdafruitBreakouts:BNO085_Breakout_Footprint | U3 |
| 1 | CIGW252010GL4R7MNE | Inductor_SMD:L_1008_2520Metric | L4 |
| 1 | Conn_01x02_MountingPin | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J7 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x06_MountingPin | Connector_JST:JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U4 |
| 1 | SI-60005-F | Connector_RJ:RJ45_Bel_SI-60062-F | J13 |
| 1 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1 |
| 1 | SPI | Connector_JST:JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal | J12 |
| 1 | Teensy4.1 | FCU2025Lib:Teensy41 | U1 |
| 1 | USB_A | Connector_USB:USB_A_Wuerth_614004134726_Horizontal | J5 |
| 1 | WE-TVS-82400102 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | ~ | FCU2025Lib:PowerPak1212-8-Dual | U5 |
Similar boards
- 4 layers30 × 77 mm

- 4 layers50 × 100 mm

- 2 layers250 × 150 mm

- 6 layers177.8 × 168.9 mm

LogicBoard smt
clydeshaffer/gametank
design files for the gametank hardware implementation
225 parts150 - 6 layers80 × 80 mm

V2ultimateflightcomp
codinga593/IRIS
A next generation model rocket focused on a precise propulsive landing on a tower.
144 parts3 - 6 layers91.5 × 91.5 mm

IO SDR 1.1
SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster
Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.
284 parts3 - 6 layers150 × 130 mm

- 4 layers98 × 98 mm

Aquila main
cuspaceflight/aquila-avionics
Flight computer schematics and firmware for Aquila, the upper stage of Griffin 1
176 parts
Questions
How big is the SimpleTeensyFCU PCB?
It measures 45 × 95 mm and has 4 copper layers, 1.61 mm thick.
What parts does the SimpleTeensyFCU use?
64 parts, built around the TEENSY 4.1, ADS1219IPW, AP63205WU and MS5611-01BA03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimpleTeensyFCU KiCad files?
From the Kev1n8088/SimpleTeensyFCU repository on GitHub, at the commit this page was made from: the board is SimpleTeensyFCU.kicad_pcb and its schematic SimpleTeensyFCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimpleTeensyFCU design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.