Skip to the content
6 layers91.5 × 91.5 mmIO SDR 1.1, the printed circuit board in 3D

Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

Size
91.5 × 91.5 mm
Copper layers
6
Thickness
1.62 mm
Parts
284
Nets
429
Pads
1,456
Tracks, vias
6,906, 985
Pours
32
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
10 Mar 2024
Updated
6 Oct 2025

Overview

IO SDR 1.1 is an open-source printed circuit board by SunnyYoshimitsu, from the SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster repository on GitHub. It is a 6-layer board of 91.5 × 91.5 mm with 284 parts on 429 nets, routed with 6,906 tracks and 985 vias.

It is built around the XC7Z010-1CLG400I, AD9363BBCZ and USB3320C-EZK-TR, with the MS5611-01BA03, MX25U1635EZNI-10G and TXS02612RTWR among its other parts. Its parts include 136 capacitors, 57 resistors, 18 ICs, 12 connectors and 11 inductors. It belongs with the radio and wireless boards and the FPGA and CPLD boards of this library.

Main components

12

README

Secondary Flight Computer/README.md

ProPico

An RP2040 dev board improving on aspects of the pi pico.

⚠️ This project is still under development, reproduce at your own risk ⚠️

While I have assembled several of these boards and they seem to work, there is still some verification to be done, so don't expect this to be a fully finished project just yet.

Features

  • An LDO for power making the 3V3 supply much cleaner.
  • Larger flash sizes up to 16MB (the higher capacities will likely require a different board revision due to the larger IC package) with binary indicators on the bottom so you remember which board has what.
  • USB-C for power and programming, includes CC resistors meaning it'll work with modern USB-C chargers/cables.
  • A reset button alongside the bootsel, allowing you to reboot into UF2 mode without having to unplug the board.
  • Extra GPIO broken out and used:
    • GPIO 23 - connected to an extra LED.
    • GPIO 24 - connected to the EEPROM I2C line.
    • GPIO 25 - connected to the EEPROM I2C line and an LED (for compatibility with the pico led pinout).
    • GPIO 29 (ADC3) - replaces the 3V3_EN pin on the original pico, giving you an extra ADC pin.
  • LM4040 voltage reference for the ADC.
  • I2C EEPROM/FRAM onboard so you have easy to use non volatile storage.
  • RUN pin exposed next to the debug port.

Pinout

ProPico pinout

Parts

284
QtyValueFootprintReferences
2910nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC117, C121, C122, C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133, C134, C136 +13
1910uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6, C11, C12, C13, C15, C16, C18, C19, C25, C28, C29, C32, C33, C34, C35, C59 +3
16100nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC80, C81, C90, C91, C99, C100, C105, C106, C110, C115, C116, C139, C140, C141, C146, C147
150.1uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC17, C20, C92, C93, C97, C98, C101, C102, C103, C104, C107, C138, CA1, CA8, CA11
1418pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC65, C67, C72, C73, C82, C83, C84, C85, C86, C87, C88, C89, CA5, CA6
121uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC56, C57, C58, C62, C63, C68, C70, C111, C112, C114, C118, C148
1220KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR6, RA9, RA11, RA13, RA15, RA16, RA17, RA21, RA22, RA23, RA25, RA27
124.7KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR13, R39, R40, R41, R42, R43, R46, R51, R52, R53, RA28, RA29
12TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12
82.4KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR33, R34, R35, R36, R44, R45, RA1, RA2
6100pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC10, C14, C30, C31, C119, C120
610KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2, R3, R7, R15, R56, RA6
510uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC94, C95, C96, C113, C135
41nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC76, C77, C78, C79
42.2uHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1, L4, L7, L8
447uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC21, C23, C26, C27
4AP3445W6-7Libraries:TCS4615U3, U4, U7, U8
4MountingHole_PadMountingHole:MountingHole_2.5mm_PadH1, H2, H3, H4
4RF2-49B-T-00-50-G-HDWConnector_Coaxial:SMA_Amphenol_132134-11_VerticalJ9, J10, J11, J12
4TCM1-63AX_TCM1-63AX_:XFMR_TCM1-63AX_T1, T2, T3, T4
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C108, C109
31KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRA12, RA14, RA18
322uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2, C4
333RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, RA19, RA20
37.5KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR4, R8, R10
380.5RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR37, R38, R48
3HR02X5VLibraries:HR02X5VV1, V2, V3
3SQ2361ESLibraries:HR8031GS6QA1, QA2, QA3
2100KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRA24, RA26
210118193-0001LFLibraries:AMPHENOL_10118193-0001LFJ1, J2
210uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC7, C8
212KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR9, R11
21RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR31, R32
222pfCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC149, C150
2330nFInductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolderL12, L14
2330nHInductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolderL11, L13
2Conn_02x06_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_VerticalJ5, J6
2LED6LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3, D4
2R0805Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolderL3, L5
2RT9193-33BLibraries:RT9193-33BU11, U17
2S8050Package_TO_SOT_SMD:SOT-23Q1, Q2
2TPS7A8101DRBTLibraries:TPS7A8101DRBTU5, U6
2~Libraries:SOT23 MOSFET FOOT PRINTQ3, Q4
1100uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
114.3KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRA8
115KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR14
11MResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRA7
11uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC9
1240RResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR47
125MHzLibraries:XTAL_TSX-3225_25.0000MF10P-C0Y2
12KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR5
13.3KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR12
132.768kHzCrystal:Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mmY3
133.333MHzLibraries:XTAL_ABM8AIG-25.000MHZ-12-2Z-T3CY2
14.7KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderRA3
14.7uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderCA10
15.1KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderRA4
1502570-0893Libraries:MOLEX_502570-0893J13
150KPotentiometer_SMD:Potentiometer_Bourns_3214W_VerticalR29
173412-0110Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ8
18.06KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRA10
1AD9363BBCZLibraries:AD9361BBCZU12
1ASDMB-33.333MHZ-LC-TLibraries:XTAL_ASDMB-33.333MHZ-LC-TCY1
1BNO085BNO085:IC_BNO080U21
1Conn_01x03_ShieldedConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_02x20_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ4
1ESDResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR30
1H5TQ4G63AFRLibraries:H5TQ4G63AFRU18
1MS5611-01BAPackage_LGA:LGA-8_3x5mm_P1.25mmU19
1MX25U1635EZNI-10GLibraries:MX25U1635EZNI-10GU15
1R0402Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolderL6
1SUP5522FPackage_TO_SOT_SMD:SOT-23-3D2
1SUPK24Diode_SMD:D_SOD-123D1
1SW_DIP_x02Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPinSW1
1SY6280AACLibraries:SY6280AACU2
1TCMT1107Package_SO:SOP-4_4.4x2.6mm_P1.27mmU1
1TXS02612RTWRLibraries:TXS02612RTWRU16
1USB3320C-EZK-TRLibraries:USB3320C-EZK-TRU13
1XC7Z010-1CLG400ILibraries:XC7Z010-1CLG400IU14

More from SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

8
  • 4 layers93 × 93 mmFCSat dual, the printed circuit board in 3D

    FCSat dual

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    215 parts3
  • 4 layers67.6 × 59.7 mmQuadESC, the printed circuit board in 3D

    QuadESC

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    204 parts3
  • 4 layers85 × 85 mmOpenlst hw, the printed circuit board in 3D

    Openlst hw

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    123 parts3
  • 4 layers133.8 × 68.5 mm4in1ESC, the printed circuit board in 3D

    4in1ESC

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    116 parts3
  • 2 layers40 × 40 mmProPico, the printed circuit board in 3D

    ProPico

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    66 parts3
  • 4 layers22 × 20.8 mmProPico, the printed circuit board in 3D

    ProPico

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    39 parts3
  • 4 layers80 × 80 mmSolar panel side Z, the printed circuit board in 3D

    Solar panel side Z

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    8 parts3
  • 4 layers22.5 × 22.6 mmPCB Stator, the printed circuit board in 3D

    PCB Stator

    SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster

    Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

    6 parts3

Similar boards

  • 8 layers99.4 × 60 mmIO SDR 1.1, the printed circuit board in 3D

    IO SDR 1.1

    rishivg/IO-SDR

    Open-Source software-defined FPGA radio hardware platform

    339 parts10CERN-OHL-S-2.0
  • 4 layers100.6 × 97.3 mmEBAZ4205, the printed circuit board in 3D

    EBAZ4205

    chiro2001/EBAZ4205

    A 5$ Xilinx ZYNQ development board.

    586 parts1MIT
  • 4 layersPower board v1, the printed circuit board in 3D

    Power board v1

    N-Pulse/EEG-HW-System

    EEG acquisition board, power board and headset development

    79 parts
  • 4 layers163.3 × 100 mmHF phase detector, the printed circuit board in 3D

    HF phase detector

    KLFAMO/phase_detector_Artiq

    This is a phase detector designed to measure phase differences for input frequencies ranging from 0 to approximately 200 MHz. The device includes configurable frequency dividers for each input channel.

    461 parts
  • 4 layers161 × 100 mmAD DA module, the printed circuit board in 3D

    AD DA module

    KLFAMO/relock_Artiq

    This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.

    416 parts
  • 4 layers56.6 × 82.7 mmPackaged amp, the printed circuit board in 3D

    Packaged amp

    westonb/rogowski-relief

    rogowski coil current probe

    77 parts242
  • 2 layers195 × 148.5 mmSpecAnFrontEnd, the printed circuit board in 3D

    SpecAnFrontEnd

    richardhosking/Spectrum-analyser-Front-End-KICAD

    PCB/Schematic files

    151 parts2

Questions

How big is the IO SDR 1.1 PCB?

It measures 91.5 × 91.5 mm and has 6 copper layers, 1.62 mm thick.

What parts does the IO SDR 1.1 use?

284 parts, built around the XC7Z010-1CLG400I, AD9363BBCZ, USB3320C-EZK-TR and MS5611-01BA03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IO SDR 1.1 KiCad files?

From the SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster repository on GitHub, at the commit this page was made from: the board is Main Flight Computer/KICAD Design Files/IO_SDR_1.1.kicad_pcb and its schematic 4in1ESC/4in1ESC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IO SDR 1.1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask SunnyYoshimitsu before reusing the design.