
FT2D PD20V 12V5 3A 评审原理图
Accelerator6666/Yaesu-FT2D-USBC-charge
检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。

power adaptor biosemi
Bio power2 is an open-source printed circuit board by bcbergmanuu, from the bcbergmanuu/Bio-power2 repository on GitHub. It is a 4-layer board of 32.5 × 24 mm with 33 parts on 32 nets, routed with 157 tracks and 48 vias.
It is built around the ESDA25W, TC2030-IDC-NL and TYPE-C-31-M-12, with the YI321611U151-4R5T among its other parts. Its parts include 10 capacitors, 7 resistors, 3 connectors, 2 ICs and 1 diode.
Design goals:
LDO: lt3041
Power Delivery: stusb4500
PCB Design:

Schematics:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C8, C9, C11 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C7 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R7 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 62k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 6vdc | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D1 |
| 1 | ESDA25W | footprints:SOT323-3L_STM | CR1 |
| 1 | LT3041ADE-PBF | lt3041:05-08-1708_ADI | U3 |
| 1 | STUSB4500QTR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm_ThermalVias | U1 |
| 1 | TC2030-IDC | Tag-Connect:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | TYPE-C-31-M-12 | typec:HRO_TYPE-C-31-M-12 | J1 |
| 1 | VBUS_EN | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | YI321611U151-4R5T | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | cc1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | cc2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | gnd | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |

Accelerator6666/Yaesu-FT2D-USBC-charge
检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。

jadenrhee/JRWatch
Low-power BLE wearable: nRF52840 module + nPM1300 PMIC + BMI270 IMU + Sharp MIP display. 36 mm 4-layer board, ~15 µA projected sleep current, Zephyr firmware.




Markuselectronics/DIY-USB-C-Reflow-Hotplate
A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.


flummer/sao-wall
Design for a SAO display PCB, power and control board
It measures 32.5 × 24 mm and has 4 copper layers, 1.6 mm thick.
33 parts, built around the ESDA25W, TC2030-IDC-NL, TYPE-C-31-M-12 and YI321611U151-4R5T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bcbergmanuu/Bio-power2 repository on GitHub, at the commit this page was made from: the board is bio-power-2.kicad_pcb and its schematic bio-power-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bcbergmanuu before reusing the design.