2 layers
Uv led board pcb
battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org
141 parts1
2 layers
Control board
battlecoder/electronics1Hardware projects that you will most likely find described in blog.damnsoft.org
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 24
- Pads
- 93
- Tracks, vias
- 323, 10
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jun 2016
- Updated
- 14 Sep 2020
Overview
Control board is an open-source printed circuit board by battlecoder, from the battlecoder/electronics repository on GitHub. It is a 2-layer board with 23 parts on 24 nets, routed with 323 tracks and 10 vias.
Its parts include 8 switches, 7 resistors and 4 connectors.
README
README.mdelectronics
Small Hardware projects that you will most likely find described in my blog: blog.damnsoft.org
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6, R7, R8, R9 |
| 4 | 7SEGM | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | S1, S2, S3, S4 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | , , , |
| 4 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW2, SW3, SW4, SW5 |
| 1 | 7SEG_DIGITS2 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 1 | 7SEG_SEGMENTS2 | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J8 |
| 1 | INPUTS2 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J4 |
| 1 | REED | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
Questions
What parts does the Control board use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control board KiCad files?
From the battlecoder/electronics repository on GitHub, at the commit this page was made from: the board is uv_box/pcbs/control_panel/control_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control board design in my own project?
Its repository states no licence, so its author keeps all rights: ask battlecoder before reusing the design.
More from battlecoder/electronics
2- 2 layers
Esp8266 programmer
battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org
7 parts1
Similar boards
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258