2 layers
Uv led board pcb
battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org
141 parts1
2 layers
Esp8266 programmer
battlecoder/electronics1Hardware projects that you will most likely find described in blog.damnsoft.org
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 25
- Tracks, vias
- 30, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jun 2016
- Updated
- 14 Sep 2020
Overview
Esp8266 programmer is an open-source printed circuit board by battlecoder, from the battlecoder/electronics repository on GitHub. It is a 2-layer board with 7 parts on 7 nets, routed with 30 tracks and 0 vias.
It is built around the LD1117S33TR(MS). Its parts include 3 connectors, 2 capacitors, 1 IC and 1 switch. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
Main components
1README
README.mdelectronics
Small Hardware projects that you will most likely find described in my blog: blog.damnsoft.org
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 10uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J1 |
| 1 | CONN_02X04 | custom_footprints:Socket_Strip_Straight_2x04_Pitch2.54mm | J2 |
| 1 | LD1117S33TR | TO_SOT_Packages_THT:TO-220-3_Vertical | U1 |
| 1 | PGMMODE | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | RESET | Buttons_Switches_THT:SW_PUSH_6mm | SW2 |
Questions
What parts does the Esp8266 programmer use?
7 parts, built around the LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266 programmer KiCad files?
From the battlecoder/electronics repository on GitHub, at the commit this page was made from: the board is ESP8266/esp8266_programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266 programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask battlecoder before reusing the design.
More from battlecoder/electronics
2- 2 layers
Control board
battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org
23 parts1
Similar boards
- 2 layers65 × 56 mm
- 2 layers100 × 100 mm
- 2 layers65 × 56 mm
- 2 layers
Robot MGR
rayvburn/diff_drive_mapping_robot
ROS driver for the Raspberry Pi based differential drive robot
95 parts27 - 4 layers111.8 × 80.8 mm
- 4 layers45.5 × 50 mm
Adapter
strfry/LG360VR
This about making the LG 360 VR Goggles usable with a normal DisplayPort outlet.
58 parts19 - 2 layers74.9 × 40.6 mm
Anavi fume extractor
AnaviTechnology/anavi-fume-extractor
Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.
34 parts17 - 2 layers74.9 × 40.6 mm
Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17