

OS RelayDecoder-4
- Size
- 54.5 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 73
- Pads
- 196
- Tracks, vias
- 543, 173
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
OS RelayDecoder-4 is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 54.5 × 73 mm with 57 parts on 73 nets, routed with 543 tracks and 173 vias.
It is built around the ATMEGA328-AU, AMS1117-5.0 and 1N4148WS, with the MB10S among its other parts. Its parts include 13 resistors, 11 connectors, 7 diodes, 6 capacitors and 5 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J201, J203, J301, J302, J401, J402, J501, J502 |
| 4 | 100R | custom_kicad_lib_sk:R_0603_smalltext | R203, R301, R401, R501 |
| 4 | 1N4148WS | Diode_SMD:D_SOD-323 | D202, D302, D401, D501 |
| 4 | 1k | custom_kicad_lib_sk:R_0603_smalltext | R204, R302, R402, R502 |
| 4 | G6K-2F-Y-TR DC12 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K201, K301, K401, K501 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104 |
| 4 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q201, Q301, Q401, Q501 |
| 2 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R3, R4 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C201, C203 |
| 2 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G***, G*** |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C202 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C303 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R202 |
| 1 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R5 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301 |
| 1 | 6N137 | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U3 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U301 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U202 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y201 |
| 1 | D | Diode_SMD:D_SOD-323 | D1 |
| 1 | FEMALE | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J701 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J202 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201 |
| 1 | MALE | custom_kicad_lib_sk:connector_3.50mm_4P horizontal_MALE | J702 |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D301 |
| 1 | default_switch | custom_kicad_lib_sk:default_switch | SW601 |
The 56 most common of 57 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 8 layers118 × 100 mm

Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 6 layers100 × 70 mm

Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 4 layers66.6 × 86.6 mm

DPSin Board WiFi Triac
gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.
62 parts1 - 6 layers180 × 110 mm

Reflow station
atwardzik/reflow_station_pcb
This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.
267 parts - 2 layers36.6 × 63.6 mm

- 2 layers68.6 × 53.3 mm

- 2 layers70 × 130 mm

Frequency Generator A
joshishreyas320/Frequency-Generator-PCB-Design-KiCAD
DDS-based frequency generator PCB designed in KiCad. AD9833 waveform IC controlled by ATmega328A over SPI generates sine, triangle, and square waves.
37 parts - 2 layers82 × 94 mm

LIBV
LIBVproject/LIBV-ventilator-pcb
Low Resource Ventilator Project to fight against COVID-19.
127 partsMIT
Questions
How big is the OS RelayDecoder-4 PCB?
It measures 54.5 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OS RelayDecoder-4 use?
57 parts, built around the ATMEGA328-AU, AMS1117-5.0, 1N4148WS and MB10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OS RelayDecoder-4 KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/DECODERS_N_OCCUPANCY/OS-RelayDecoder-4/OS-RelayDecoder-4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OS RelayDecoder-4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.