Skip to the content
2 layers40 × 36.5 mmOS pointMotorController, the printed circuit board in 3D

OS pointMotorController

bask185/Train-Science-DIY3
Size
40 × 36.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
16
Pads
61
Tracks, vias
176, 14
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Mar 2023
Updated
20 May 2026

Overview

OS pointMotorController is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 40 × 36.5 mm with 20 parts on 16 nets, routed with 176 tracks and 14 vias.

It is built around the ATTINY85-15M, L293D and L78L05CZ. Its parts include 4 connectors, 3 resistors, 3 ICs, 2 capacitors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

20
QtyValueFootprintReferences
3Screw_Terminal_01x02Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_HorizontalJ1, J2, J3
1100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2
1100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC3
1220uFCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC2
1470kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3
147kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
16mm_tactilecustom_kicad_lib_sk:SW_NO_SILKSW1
1ATtiny85Package_DIP:DIP-8_W7.62mmU3
1D_Bridge_+A-ADiode_THT:Diode_Bridge_Round_D9.0mmD1
1ICSPConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1L293DPackage_DIP:DIP-16_W7.62mmU1
1L78L05Package_TO_SOT_THT:TO-92_Inline_WideU2
1LOGOcustom_kicad_lib_sk:Train-Science logo smallG***

The 15 most common of 20 parts.

More from bask185/Train-Science-DIY

12
  • 2 layers68.5 × 130.5 mmPointMatrix, the printed circuit board in 3D

    PointMatrix

    bask185/Train-Science-DIY

    144 parts3
  • 2 layers153.2 × 127.5 mmSignal PCB, the printed circuit board in 3D

    Signal PCB

    bask185/Train-Science-DIY

    141 parts3
  • 2 layers99.5 × 61 mmOSSD-8A, the printed circuit board in 3D

    OSSD-8A

    bask185/Train-Science-DIY

    124 parts3
  • 2 layers105.5 × 63.5 mmOS S88n, the printed circuit board in 3D

    OS S88n

    bask185/Train-Science-DIY

    108 parts3
  • 2 layers83.5 × 50.3 mmOS ServoDriver, the printed circuit board in 3D

    OS ServoDriver

    bask185/Train-Science-DIY

    91 parts3
  • 2 layers81 × 71.2 mmS88 UNO SHIELD, the printed circuit board in 3D

    S88 UNO SHIELD

    bask185/Train-Science-DIY

    91 parts3

Similar boards

  • 2 layers64.1 × 50.2 mmMotor assy 00, the printed circuit board in 3D

    Motor assy 00

    dzavalishin/hardware

    Misc smart house hardware

    50 parts3
  • 4 layers104.1 × 99.1 mmISA ES1868, the printed circuit board in 3D

    ISA ES1868

    hkzlab/ES1868_ISA8

    ISA 8bit sound card based on the ES1868F sound chip, providing Sound Blaster PRO and OPL3 compatibility in a highly integrated package

    120 parts88
  • 2 layers50.8 × 38.1 mmLk201, the printed circuit board in 3D

    Lk201

    pkoning2/lk201emu

    Emulate DEC LK201 keyboard using a standard PC USB keyboard

    19 parts56BSD-2-Clause
  • 2 layers104 × 73 mmArdf tx, the printed circuit board in 3D

    Ardf tx

    hmatuschek/ardf-tx

    Schematics and firmware for simple ARDF transmitter.

    55 parts5
  • 2 layers32 × 19 mmFan controller, the printed circuit board in 3D

    Fan controller

    flaviut/fan-controller

    a automatic temperature-sensing fan controller

    21 parts2
  • 2 layers99.1 × 99.1 mm4op drum module rev2, the printed circuit board in 3D

    4op drum module rev2

    vk2gpu/4op_drum_synth

    OPL3 based 4-op drum synth module

    117 parts2
  • 4 layers130 × 140 mmPreamp, the printed circuit board in 3D

    Preamp

    djupdal/asd-amp

    275 parts1
  • 2 layers38.5 × 59 mmDual dps-1200FB, the printed circuit board in 3D

    Dual dps-1200FB

    Grobzi/dual-dps-1200FB

    Arduino project for monitoring DPS 1200FB PSUs

    23 parts1GPL-3.0

Questions

How big is the OS pointMotorController PCB?

It measures 40 × 36.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OS pointMotorController use?

20 parts, built around the ATTINY85-15M, L293D and L78L05CZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OS pointMotorController KiCad files?

From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/DECODERS_N_OCCUPANCY/OS-pointMotorController/OS-pointMotorController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the OS pointMotorController design in my own project?

Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.