Skip to the content
2 layers40 × 26.5 mmLatchingRelay, the printed circuit board in 3D
Size
40 × 26.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
11
Pads
25
Tracks, vias
45, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Mar 2023
Updated
20 May 2026

Overview

LatchingRelay is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 40 × 26.5 mm with 9 parts on 11 nets, routed with 45 tracks and 0 vias.

It is built around the 1N4148WS. Its parts include 3 connectors, 1 resistor, 1 diode and 1 switch.

Main components

1

Parts

9
QtyValueFootprintReferences
3Screw_Terminal_01x03Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_HorizontalJ101, J102, J103
11N4148WSDiode_SMD:D_SOD-323D101
147Rcustom_kicad_lib_sk:R_0805_handsolder-smalltextR101
1AZ850P2-xRelay_THT:Relay_DPDT_FRT5K101
1LOGOcustom_kicad_lib_sk:Train-Science logo smallG***

The 7 most common of 9 parts.

More from bask185/Train-Science-DIY

12
  • 2 layers68.5 × 130.5 mmPointMatrix, the printed circuit board in 3D

    PointMatrix

    bask185/Train-Science-DIY

    144 parts3
  • 2 layers153.2 × 127.5 mmSignal PCB, the printed circuit board in 3D

    Signal PCB

    bask185/Train-Science-DIY

    141 parts3
  • 2 layers99.5 × 61 mmOSSD-8A, the printed circuit board in 3D

    OSSD-8A

    bask185/Train-Science-DIY

    124 parts3
  • 2 layers105.5 × 63.5 mmOS S88n, the printed circuit board in 3D

    OS S88n

    bask185/Train-Science-DIY

    108 parts3
  • 2 layers83.5 × 50.3 mmOS ServoDriver, the printed circuit board in 3D

    OS ServoDriver

    bask185/Train-Science-DIY

    91 parts3
  • 2 layers81 × 71.2 mmS88 UNO SHIELD, the printed circuit board in 3D

    S88 UNO SHIELD

    bask185/Train-Science-DIY

    91 parts3

Similar boards

  • 2 layers134 × 88 mmTulipcc, the printed circuit board in 3D

    Tulipcc

    shorepine/tulipcc

    The Tulip Creative Computer and AMYboard - portable Python synthesizers

    103 parts978
  • 8 layers100.2 × 55 mmJetson nano baseboard, the printed circuit board in 3D

    Jetson nano baseboard

    antmicro/jetson-nano-baseboard

    Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX

    391 parts548Apache-2.0
  • 4 layers94.4 × 72.8 mmRP2040 base, the printed circuit board in 3D

    RP2040 base

    Twisted-Fields/rp2040-motor-controller

    A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

    325 parts419
  • 2 layers135.9 × 89.5 mmLeft, the printed circuit board in 3D

    Left

    TeXitoi/keyseebee

    KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.

    61 parts348MIT
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0
  • 4 layers22.9 × 50.8 mmLg hvac esp32, the printed circuit board in 3D

    Lg hvac esp32

    JanM321/esphome-lg-controller

    Wired controller for LG HVAC units using ESPHome and ESP32

    20 parts2920BSD
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0

Questions

How big is the LatchingRelay PCB?

It measures 40 × 26.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LatchingRelay use?

9 parts, built around the 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LatchingRelay KiCad files?

From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/analog_solutions/CabControl/latchingRelay/latchingRelay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LatchingRelay design in my own project?

Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.