

IO extender
- Size
- 50 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 26
- Pads
- 118
- Tracks, vias
- 501, 156
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
IO extender is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 50 × 30.5 mm with 26 parts on 26 nets, routed with 501 tracks and 156 vias.
It is built around the 74HC165D and 74HC595. Its parts include 10 connectors, 9 resistors, 2 capacitors, 2 ICs and 1 diode.
Main components
2Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | custom_kicad_lib_sk:R_0402_NO_SILK | R102, R202, R302, R402, R502, R602, R702, R802 |
| 8 | Conn_01x04 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J101, J201, J301, J401, J501, J601, J701, J801 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C901, C902 |
| 1 | 3k3 | custom_kicad_lib_sk:R_0603_smalltext | R901 |
| 1 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U901 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U902 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1001 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J1002 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D901 |
The 24 most common of 26 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers171.5 × 106.7 mm

Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers306.1 × 130.2 mm

8-Bit CPU 32k
slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64
132 parts94 - 2 layers208.9 × 170.8 mm

8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!
207 parts54 - 2 layers148.8 × 132.2 mm

Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 4 layers120 × 100 mm

- 2 layers56 × 110 mm

Trs pcb
Windfisch/midikraken
A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.
125 parts28 - 2 layers100 × 100 mm

Questions
How big is the IO extender PCB?
It measures 50 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IO extender use?
26 parts, built around the 74HC165D and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IO extender KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/MOA/IO_extender/IO_extender.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the IO extender design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.