

FY entry
- Size
- 62 × 67.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 39
- Pads
- 120
- Tracks, vias
- 131, 66
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
FY entry is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 4-layer board of 62 × 67.5 mm with 31 parts on 39 nets, routed with 131 tracks and 66 vias.
It is built around the LM311, SM4007 and BC547. Its parts include 12 connectors, 6 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J201, J401, J601, J801, J1101 |
| 4 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical | J301, J501, J701, J901 |
| 2 | RJ12 | custom_kicad_lib_sk:RJ12 | J1301, J1302 |
| 2 | SM4007 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1301, D1302 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1301 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1303 |
| 1 | 150k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1302 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1305 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1306 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1304 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1301 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1001 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1301 |
| 1 | LM311 | Package_DIP:DIP-8_W7.62mm_LongPads | U1301 |
| 1 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G*** |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J1201 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1001 |
The 26 most common of 31 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers

- 2 layers

- 2 layers65 × 26.5 mm

Sidekick
meetsidekick/pcb
This project follows the Pride Versioning Scheme! Current Version: v0.5.1. The latest version can be found on the releases page along with gerber files.
14 parts - 2 layers217.2 × 113 mm

Junior interface
laurent-fr/junior_computer_replica
A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's
120 parts14 - 2 layers134.5 × 83.9 mm

LC Meter
TeknoTrek/LC-Meter
This repository is part of the Teknotrek YouTube channel, featuring the DIY LC Meter project. It includes KiCad files, schematics, PCB layouts, and Arduino firmware.
27 parts9 - 2 layers100 × 80 mm

- 4 layers140 × 136 mm

Vinyl adc rev d
MadsRudolph/vinyl-adc
Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements
184 parts1 - 2 layers83.1 × 95.3 mm

Datasette bridge
arvjus/Extended_RC6502_Apple1
Flash Disk Storage for RC6502 Apple1 Replica
42 partsMIT
Questions
How big is the FY entry PCB?
It measures 62 × 67.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FY entry use?
31 parts, built around the LM311, SM4007 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FY entry KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/blockModules/FY_entry/FY_entry.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FY entry design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.