

- Size
- 62 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 50
- Pads
- 169
- Tracks, vias
- 389, 86
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
BloX is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 62 × 48 mm with 47 parts on 50 nets, routed with 389 tracks and 86 vias.
It is built around the ATMEGA328-AU, EL817 and AO3400A, with the SM4007 and MB6S among its other parts. Its parts include 11 resistors, 9 diodes, 7 ICs, 5 capacitors and 5 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)EL817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 18us 18us 5.8mA 50% 50V 5kV 600% 9V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output OptoisolatorsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General PurposeMB6S
MBS-55℃~+150℃ 1.1V@400mA 1A 35A 5uA@600V 600V Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R402, R501, R502, R504 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q401, Q501, Q502, Q503 |
| 4 | EL817 | Package_DIP:SMDIP-4_W9.53mm | U401, U402, U403, U601 |
| 4 | SM4007 | Diode_SMD:D_SOD-123F | D401, D405, D406, D601 |
| 3 | MB6S | Package_TO_SOT_SMD:TO-269AA | D402, D403, D404 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C201, C202 |
| 2 | 33R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R403, R404 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | servo501, servo502 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R202 |
| 2 | RJ12 | Connector_RJ:RJ25_Wayconn_MJEA-660X1_Horizontal | J601, J602 |
| 1 | 0R1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R503 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C303 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R401 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301 |
| 1 | 680R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R601 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U201 |
| 1 | D_Bridge_+-AA | Diode_SMD:Diode_Bridge_Diotec_ABS | D301 |
| 1 | HEADER_3x2 | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical | U202 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U301 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J603 |
| 1 | crystal_arduino | custom_kicad_lib_sk:crystal_arduino | Y201 |
| 1 | signals | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J501 |
| 1 | tracks | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J401 |
| 1 | yellow_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201 |
The 44 most common of 47 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 4 layers230 × 196.7 mm

Steel form Dish washer
R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product
156 parts - 2 layers27.5 × 74.5 mm

- 2 layers100 × 83.3 mm

- 2 layers82.5 × 63.5 mm

Dashboard
RidhaBouyahi/Motor-Control-And-Dashboard-PCB
This Dashboard PCB is developed to get data (position,temperature...) from sensors, control actuators and Dc Motor direction and speed control using PWM .
58 parts1 - 4 layers150 × 80 mm

- 4 layers149 × 95 mm

- 2 layers25.8 × 20.3 mm

Gonioreflectometer
gamingdoom/gonioreflectometer-neural-brdfs
DIY Gonioreflectometer and neural BRDFs.
39 parts1MIT - 2 layers100 × 95 mm

Questions
How big is the BloX PCB?
It measures 62 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BloX use?
47 parts, built around the ATMEGA328-AU, EL817, AO3400A and SM4007. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BloX KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/blockModules/analog/BloX MkIII PCB/BloX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BloX design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.