Skip to the content
2 layers75 × 75 mmAndyvision kicad, the printed circuit board in 3D

Andyvision kicad

balthorium/av
Size
75 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
44
Pads
135
Tracks, vias
422, 37
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Sep 2023
Updated
7 Sep 2023

Overview

Andyvision kicad is an open-source printed circuit board by balthorium, from the balthorium/av repository on GitHub, published under the MIT licence. It is a 2-layer board of 75 × 75 mm with 38 parts on 44 nets, routed with 422 tracks and 37 vias.

It is built around the PN2222A and JUMPER3. Its parts include 16 resistors, 10 connectors, 8 transistors and 1 IC.

Main components

2

README

README.md

av

Parts

38
QtyValueFootprintReferences
16RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
8Conn_01x04_FemaleConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3, J4, J5, J6, J7, J8, J9, J10
8PN2222APackage_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
3Jumper_3Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabelsA0, A1, A2
2Conn_01x05_FemaleConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ1, J2
1MCP23017_SPPackage_DIP:DIP-28_W7.62mmU1

More from balthorium/av

1

Similar boards

  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers49 × 49 mmOSBMS Balancer Rev 0.9, the printed circuit board in 3D

    OSBMS Balancer Rev 0.9

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    76 parts248
  • 4 layers137 × 86 mmCIAA K60, the printed circuit board in 3D

    CIAA K60

    ciaa/Hardware

    Hardware de la CIAA

    467 parts216
  • 2 layers100 × 90 mmRiser, the printed circuit board in 3D

    Riser

    zeldin/iceGDROM

    An FPGA based GDROM emulator for the Sega Dreamcast

    29 parts173GPL-3.0
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers86 × 54 mmD50mram, the printed circuit board in 3D

    D50mram

    dojoe/roland-mram-card

    A multi-bank MRAM based memory card for Roland instruments

    44 parts75
  • 2 layers54.4 × 43.2 mmReprom, the printed circuit board in 3D

    Reprom

    hbekel/reprom64

    rom replacement board for the C64

    21 parts34GPL-2.0
  • 2 layers146.1 × 53.3 mmWatersens, the printed circuit board in 3D

    Watersens

    whitebox-labs/tentacle

    An arduino shield to host and individually isolate up to 4 Atlas Scientific sensor circuits. Measure pH, conductivity, dissolved oxygen, ORP, temperature

    77 parts32

Questions

How big is the Andyvision kicad PCB?

It measures 75 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Andyvision kicad use?

38 parts, built around the PN2222A and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Andyvision kicad KiCad files?

From the balthorium/av repository on GitHub, at the commit this page was made from: the board is kicad/andyvision_daisy/andyvision_kicad.kicad_pcb and its schematic kicad/andyvision_controller/andyvision_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Andyvision kicad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).