
Pico datalogger v2
bablokb/pcb-datalogger-v2
Pico board for data-logging with power-management and XTSD storage

Pico board for data-logging with power-management and micro-sd storage
Pico datalogger is an open-source printed circuit board by bablokb, from the bablokb/pcb-datalogger-v1 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 80 × 90 mm with 37 parts on 49 nets, routed with 294 tracks and 35 vias.
It is built around the PCF8523T and SN74HC74N. Its parts include 18 connectors, 4 resistors, 3 ICs, 2 capacitors and 2 switches. It belongs with the sensors and measurement boards and the RP2040 boards of this library.
Here are the KiCAD (v6) design-files for the Datalogger-PCB.



This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R3, R4 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Alt-VCC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BG_2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J16 |
| 1 | BG_3 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J20 |
| 1 | Coin_Cell | user:CR2032_Holder | BT1 |
| 1 | Conn_ADC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J8 |
| 1 | Conn_GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21 |
| 1 | Conn_I2S | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_Inky_SPI | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | Conn_Inky_SW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | Conn_UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J9 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | I2C_1 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Horizontal | J11 |
| 1 | I2C_4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J19 |
| 1 | I2C_5 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J18 |
| 1 | I2C_6 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J14 |
| 1 | I2C_7 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J12 |
| 1 | I2C_8 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | JST-PH2 VCC | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | Jumper_VSYS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Micro_SD_TF_PUSH | user:TF-Push | J7 |
| 1 | PCF8523T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Pico | user:RPi_Pico_TH_nodbg | U3 |
| 1 | RFM9x_Lora_Breakout | user:RFM9x_Lora_Breakout | J3 |
| 1 | SN74HC74N | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | SW_Push_SLIM | user:SW_PUSH_SLIM_1x4 | SW1 |
| 1 | SW_Reset | user:SW_PUSH_SLIM_1x4 | SW2 |

bablokb/pcb-datalogger-v2
Pico board for data-logging with power-management and XTSD storage


bmpc/amstrad_cpc6128_romboard
A ROM Board for the Amstrad CPC 6128 capable of loading two expansion ROMs simultaneously from an SD card.

bablokb/pcb-pico-app-base
Generic application base PCB for the Raspberry Pi Pico(W)


locked/picowater
cmake -DPICOBOARD=picow -DWIFISSID=" " -DWIFIPASSWORD=" " -DSERVERIP=" " -DSERVERPORT= ..

paulbruneau/ssio-check
A bench tester for the Bally/Midway MCR Sound I/O family: the 90908 Sound I/O and the 90913 / 91483 / 91657 Super Sound I/O (Z80, two AY-3-8910s, and all of the game's input ports).

mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
It measures 80 × 90 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the PCF8523T and SN74HC74N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bablokb/pcb-datalogger-v1 repository on GitHub, at the commit this page was made from: the board is pico-datalogger.kicad_pcb and its schematic pico-datalogger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).