
10k Hour Timer RP2040
smaroukis/rp2040-timer
An Eval Board for an RP2040 mcu + seven segment LED display + TM1638 driver + peripherals.

I built a music player that's powered by a seeed studio xiao rp2350 devboard and a dfplayer mini. My initial goal was to just build something, like literally anything, for Kai's speedrun huddle and i realized it would…
Musicplayer frfr is an open-source printed circuit board by avycado13, from the avycado13/musicplayer-frfr repository on GitHub. It is a 2-layer board of 70 × 100 mm with 61 parts on 82 nets, routed with 2,061 tracks and 290 vias.
It is built around the ESP32-S3-WROOM-1-N8, TPA6130A2RTJT and PCF8523T, with the PCM5102PW, SJ-3523-SMT-TR and S2B-PH-K-S-GW among its other parts. Its parts include 17 capacitors, 10 switches, 9 diodes, 5 resistors and 5 ICs. It belongs with the ESP32 and RP2350 boards of this library.

I built a music player that's powered by a seeed studio xiao rp2350 devboard and a dfplayer mini. My initial goal was to just build something, like literally anything, for Kai's speedrun huddle and i realized it would be cool to have a music player that i could take places without bringing my phone. I learnt alot about PCB design and i used this cool plugin called (KiCad Routing tools)[https://github.com/drandyhaas/KiCadRoutingTools] it sped up routing a lot because i just had to layout the parts and didnt have to painstakingly look through where each one goes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4149 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C6 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15, C16, C17 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12 |
| 2 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D3.0mm | TP6 |
| 1 | +5V | TestPoint:TestPoint_Pad_D3.0mm | TP4 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | AudioPlug3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Display | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Down | Button_Switch_THT:SW_PUSH_6mm | SW9 |
| 1 | ESP Boot | TestPoint:TestPoint_Pad_D3.0mm | TP7 |
| 1 | ESP Enable | TestPoint:TestPoint_Pad_D3.0mm | TP8 |
| 1 | ESP RX | TestPoint:TestPoint_Pad_D3.0mm | TP10 |
| 1 | ESP TX | TestPoint:TestPoint_Pad_D3.0mm | TP9 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U4 |
| 1 | GND | TestPoint:TestPoint_Pad_D3.0mm | TP3 |
| 1 | Left | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | Next | Button_Switch_THT:SW_PUSH_6mm | SW10 |
| 1 | PCF8523T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | Prev. | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | Right | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | SW_BAT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW5 |
| 1 | Select | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | TPA6130A2RTJT | footprints:RTJ20_2P7X2P7 | U2 |
| 1 | USB D+ | TestPoint:TestPoint_Pad_D3.0mm | TP2 |
| 1 | USB D- | TestPoint:TestPoint_Pad_D3.0mm | TP1 |
| 1 | Up | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D3.0mm | TP5 |
| 1 | Vol Down | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | Vol Up | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | XIAO-RP2350-SMD | Seeed Studio XIAO Series Library:XIAO-RP2350-SMD | U1 |

smaroukis/rp2040-timer
An Eval Board for an RP2040 mcu + seven segment LED display + TM1638 driver + peripherals.

r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

nikphillydev/NP1_DRONE
Building a quadcopter from scratch. Hardware and software. Developed using STM32 microcontroller and FreeRTOS.
HomeSmartMesh/bike_trick_tracker
Tracking sensors for bike movements like height from pressure 9 axis and ToF with record and telemetry


eihli/morse-mesh
This is the current hardware source for future Morse Mesh revisions. It is a professionally reviewed redraw of the frozen, fabricated v1 board, not a pin-compatible replacement: notably, KEYIN moved from v1 PA0 to v2…

Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)

NAIT-CNT-CMPE2750-1241-A02/SimonDemos
Demos used in this course, including the sample project.
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the ESP32-S3-WROOM-1-N8, TPA6130A2RTJT, PCF8523T and PCM5102PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the avycado13/musicplayer-frfr repository on GitHub, at the commit this page was made from: the board is pcb/.portability/backup/musicplayer-frfr.kicad_pcb and its schematic pcb/audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask avycado13 before reusing the design.