

CP2102-breakout
Breakout board for CP2102 USB to UART bridge, to aid the design of boards using this chip.
- Size
- 17.8 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 39
- Pads
- 125
- Tracks, vias
- 451, 32
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Sep 2019
- Updated
- 12 Sep 2019
Overview
CP2102-breakout is an open-source printed circuit board by autotel, from the autotel/cp2102-UART-breakout repository on GitHub. It is a 2-layer board of 17.8 × 45.7 mm with 28 parts on 39 nets, routed with 451 tracks and 32 vias.
It is built around the CP2102N-A01-GQFN24, AP2112K-3.3 and LP2985-50DBV, with the MMBT2222, MBR120 and SP0503BAHTG among its other parts. Its parts include 9 resistors, 6 connectors, 4 capacitors, 4 diodes and 3 ICs. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
6CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedLP2985-50DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 30uVrms 45dB@(1kHz) 580mV@(150mA) 5V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)MBR120
SOD-123Schottky DiodesDoeshareSP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
readme.mdBreakout board for CP2102 USB to UART bridge, to aid the design of boards using this chip. This design hasn't been ever manufactured yet, but in theory you should be able to have it produced on any common aggregagor and have it working.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C5 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R11 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | MMBT2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 22.1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 47.5K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x09_Female | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | FTDI_AUX | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J19 |
| 1 | LP2985-5.0 | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | MBR120 | Diode_SMD:D_SOD-123 | D4 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | USB_A | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J12 |
Similar boards
- 2 layers89 × 76.1 mm

- 16 layers8.1 × 50.6 mm

Adafruit adafruit circuit playground express pcb adafruit circuit playground express
oomlout/oomlout_oomp_project_bot_v_2
81 parts - 4 layers120 × 80 mm

Brain
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
113 parts - 2 layers22.9 × 48.8 mm

- 4 layers69.8 × 69.8 mm

FreeEEG32
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
217 parts39AGPL-3.0 - 2 layers100 × 99.2 mm

Usb serial interface panelized
willemcvu/midi-solenoid-driver
A set of PCBs to drive solenoids using MIDI data, for use in automating musical instruments.
114 parts21MIT - 2 layers65 × 56 mm

- 4 layers65.1 × 70 mm

ESP32-Zip Panelized
vintlabs/ESP32-Zip
ESP32 Development Module compatible with Pi Zero cases (hardware)
88 parts10GPL-3.0
Questions
How big is the CP2102-breakout PCB?
It measures 17.8 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CP2102-breakout use?
28 parts, built around the CP2102N-A01-GQFN24, AP2112K-3.3, LP2985-50DBV and MMBT2222. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CP2102-breakout KiCad files?
From the autotel/cp2102-UART-breakout repository on GitHub, at the commit this page was made from: the board is CP2102-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CP2102-breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask autotel before reusing the design.