Skip to the content
2 layers180 × 58 mmHandheld sstc, the printed circuit board in 3D

A handheld SSTC project on PCB, designed for a large magic wand form factor, entirely powered from 8s 18650. Uses direct secondary feedback with gate driver and MOSFETs, and 555 interrupter

Size
180 × 58 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
27
Pads
186
Tracks, vias
214, 172
Pours
13
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Jul 2026
Updated
15 Jul 2026

Overview

Handheld sstc is an open-source printed circuit board by automagicle, from the automagicle/handheld-sstc repository on GitHub. It is a 2-layer board of 180 × 58 mm with 66 parts on 27 nets, routed with 214 tracks and 172 vias.

It is built around the LM2596T-ADJ, UCC27624VD and 1.5KE18CA-E3/54, with the IPP320N20N3 G, MUR120GP-AP and 12TQ200 among its other parts. Its parts include 14 capacitors, 13 resistors, 10 diodes, 7 connectors and 4 ICs.

Main components

8

README

README.md

handheld-sstc

A handheld SSTC project on PCB, designed for a large magic wand form factor, entirely powered from 8s 18650. Uses direct secondary feedback with gate driver and MOSFETs, and 555 interrupter

Actual build changes that differ from PCB:

  • R13 = 100k as-built (was 150k on pcb)
  • R10 = 220ohm 2W instead of 150ohm 1/4W in order to prevent it from burning out
  • C6 = some sort of 0603 0.1uf SMD capacitor extracted from an old PCB because I forgot to order it on DigiKey

Parts

66
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_4.3mm_M4_Pad_ViaH1, H2, H3, H4
31.5KE18CA-E3/54Diode_SMD:D_SMA-SMB_Universal_HandsolderingD5, D6, D7
310ΩResistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolderR5, R6, R7
3IPP320N20N3Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD8, D9
21uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC9, C13
24700uCapacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapInC1, C2
2LOGOLOGOG***, G***
2MUR120GDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
10.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6
10.33uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC12
1100uHInductor_THT:L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mmL3
1100ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
110A FuseCustom_Parts:3522-2_KEYF1
110nCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC8
110uResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderC5
112TQ200Package_TO_SOT_THT:TO-220-2_VerticalD3
113.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11
1150kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR13
1150ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR10
115V enableConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR12
11uCapacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C7
12.2uCustom_Parts:C_Rect_L26.5mm_W16mm_P22.50mm_MKS4C3
1220uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC11
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1330ΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1470ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR9
147nCapacitor_THT:C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3C4
147uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC14
150kConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalRV1
15kConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalRV2
1680ufCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC10
1CT inputConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1Ext 15V inConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Ext 15V outConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1Interruption sig.TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mmTP1
1LM2596T-ADJPackage_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_VerticalU3
1LM7815_TO220Package_TO_SOT_THT:TO-220-3_VerticalU4
1Main power (20A max)TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ6
1Pri+Custom_Parts:CONN_7799_KEYJ5
1Pri-Custom_Parts:CONN_7799_KEYJ4
1Regulator enableConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1SB360Diode_THT:D_DO-201AD_P15.24mm_HorizontalD10
1SMCJ130ADiode_SMD:D_SMC_HandsolderingD4
1SW_SPDTConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalSW2
1SW_SPDTCustom_Parts:SW_Toggle_Copal_CF-LD-1DC6SW1
1Secondary BottomCustom_Parts:Conn_1x01_D1.00mm_LargeHandsolderJ3
1TLC555xPPackage_DIP:DIP-8_W7.62mm_LongPadsU2
1UCC27624VPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

Similar boards

  • 4 layers85.7 × 48.3 mmTinyG SuperPID Integrator, the printed circuit board in 3D

    TinyG SuperPID Integrator

    sbman/TinyG-SuperPID-Integrator

    A schematic and PCB design to integrate TinyG with SuperPID

    28 partsBSD-3-Clause
  • 2 layers99.7 × 48.8 mmAC DC Wandler, the printed circuit board in 3D

    AC DC Wandler

    MoElashmawi/Flyback-AC-DC-Converter

    Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.

    34 parts1MIT
  • 2 layers110.7 × 74.7 mmTgn, the printed circuit board in 3D

    Tgn

    0x007E/tgn

    Tone generator

    92 parts
  • 2 layers100 × 56.5 mmPi dash input hat, the printed circuit board in 3D

    Pi dash input hat

    outlandfabworks/overdash

    Open-source Raspberry Pi vehicle dashboard. Reads CAN (J1939), OBD-II, Megasquirt/Speeduino, GPS, and GPIO — streams to a canvas-based kiosk frontend with a visual no-code layout editor.

    68 partsMIT
  • 2 layers49.5 × 57.2 mmStep up, the printed circuit board in 3D

    Step up

    dzavalishin/hardware

    Misc smart house hardware

    40 parts3
  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 2 layers91 × 186.5 mmDendy, the printed circuit board in 3D

    Dendy

    UzixLS/dendy

    Yet another Dendy (Famicom) clone - 8-bit home video game console

    141 parts19
  • 2 layers78.7 × 53.3 mmElectronic Laboratory PSU LM2596-IC, the printed circuit board in 3D

    Electronic Laboratory PSU LM2596-IC

    andres-garcia-alves/electronics-laboratory-psu-lm2596-ic

    Electronic adjustable laboratory power supply unit based on LM2596-ADJ. Output 1.4-33V@2.5A, with current limitation feature.

    29 parts1GPL-3.0

Questions

How big is the Handheld sstc PCB?

It measures 180 × 58 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Handheld sstc use?

66 parts, built around the LM2596T-ADJ, UCC27624VD, 1.5KE18CA-E3/54 and IPP320N20N3 G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Handheld sstc KiCad files?

From the automagicle/handheld-sstc repository on GitHub, at the commit this page was made from: the board is handheld-sstc.kicad_pcb and its schematic handheld-sstc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Handheld sstc design in my own project?

Its repository states no licence, so its author keeps all rights: ask automagicle before reusing the design.