Skip to the content
PCBKitNew board
SB360 on a board, in 3D

SB360

Jiangsu Changjing Electronics Technology (CJ)

-55℃~+150℃ 1 Independent 100uA@60V 3A 60V 700mV@3A 80A DO-27 Schottky Diodes ROHS

Extended
JLCPCBLCSCcj/SB360
Category
Schottky Diodes
Package
DO-27
Pins
2

Overview

The SB360 is a schottky Diode made by Jiangsu Changjing Electronics Technology (CJ) in a DO-27 package with 2 pins. -55℃~+150℃ 1 Independent 100uA@60V 3A 60V 700mV@3A 80A DO-27 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (EasyEDA_Cloud:DO-27_BD5.0-L8.4-P12.40-D1.2-RD, from EasyEDA), ready for a KiCad board. 1,528 are in stock at JLCPCB (part C5295476). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
EasyEDA_Cloud:DO-27_BD5.0-L8.4-P12.40-D1.2-RDFrom EasyEDA

Parameters

7
Current - Rectified
3A
Diode Configuration
1 Independent
Non-Repetitive Peak Forward Surge Current
80A
Operating Junction Temperature Range
-55℃~+150℃
Reverse Leakage Current (Ir)
100uA@60V
Voltage - DC Reverse(Vr)
60V
Voltage - Forward(Vf@If)
700mV@3A

Order codes

1

Pinout

2
The pins of the SB360
PinNameType
1KPassive
2APassive

Open-source boards using it

All 5
  • 2 layers180 × 58 mmHandheld sstc, the printed circuit board in 3D

    Handheld sstc

    automagicle/handheld-sstc

    A handheld SSTC project on PCB, designed for a large magic wand form factor, entirely powered from 8s 18650. Uses direct secondary feedback with gate driver and MOSFETs, and 555 interrupter

    66 parts1
  • 2 layers99.7 × 48.8 mmAC DC Wandler, the printed circuit board in 3D

    AC DC Wandler

    MoElashmawi/Flyback-AC-DC-Converter

    Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.

    34 parts1MIT
  • 2 layers110.7 × 74.7 mmTgn, the printed circuit board in 3D

    Tgn

    0x007E/tgn

    Tone generator

    92 parts
  • 2 layers100 × 56.5 mmPi dash input hat, the printed circuit board in 3D

    Pi dash input hat

    outlandfabworks/overdash

    Open-source Raspberry Pi vehicle dashboard. Reads CAN (J1939), OBD-II, Megasquirt/Speeduino, GPS, and GPIO — streams to a canvas-based kiosk frontend with a visual no-code layout editor.

    68 partsMIT
  • 2 layers49.5 × 57.2 mmStep up, the printed circuit board in 3D

    Step up

    dzavalishin/hardware

    Misc smart house hardware

    40 parts3

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/cj/SB360" title="SB360 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/cj/SB360.jpg" alt="SB360" width="1200" height="900">
A picture that opens the part, for a README
[![SB360](https://pcbkit.io/embed/parts/cj/SB360.jpg?size=s)](https://pcbkit.io/parts/cj/SB360)

Questions

Is there a KiCad symbol and footprint for the SB360?

Yes. The symbol is Device:D_Schottky and the footprint EasyEDA_Cloud:DO-27_BD5.0-L8.4-P12.40-D1.2-RD, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SB360?

DO-27, with 2 pins. Its footprint is drawn on this page.

Where can I order the SB360?

JLCPCB lists it as part C5295476, with 1,528 in stock; the sellers' links on this page open their listings.

What can replace the SB360?

Parts like it in the library: the SR1080L by NH and the SR560-B by GOODWORK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SB360?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

2