2 layers81.3 × 53.6 mm
DoubleROM
monotech/ISA-DoubleROM
ISA card to provide up to two writeable option-ROM sockets.
19 parts17GPL-3.0
2 layers110.7 × 74.7 mm
Tgn
0x007E/tgnTone generator
- Size
- 110.7 × 74.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 86
- Pads
- 326
- Tracks, vias
- 414, 86
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2026
- Updated
- 15 Apr 2026
Overview
Tgn is an open-source printed circuit board by 0x007E, from the 0x007E/tgn repository on GitHub. It is a 2-layer board of 110.7 × 74.7 mm with 92 parts on 86 nets, routed with 414 tracks and 86 vias.
It is built around the LM386, 74LS193P-E and 74LS33PC, with the NA555P, BS170 and SB360 among its other parts. Its parts include 31 resistors, 22 capacitors, 12 connectors, 11 ICs and 2 diodes.
Main components
6
LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmps
74LS193P-E
DIP-1674LS Programmable divide ratio、Reset function、Cascade counter、Synchronous counting、Multi-mode counting DIP-16 Counters, Dividers ROHSRenesas ElectronicsCounters, Dividers
74LS33PC
DIP-140℃~+70℃ 100uA 2 22ns@5V,15pF 24mA 2V 4 4.75V~5.25V 500mV 74LS 800mV NOR Gate Open Collector DIP-14 Logic Gates ROHSTexas InstrumentsLogic Gates
NA555P
PDIP-8-40℃~+105℃ 100kHz 4.5V~16V PDIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
SB360
DO-27-55℃~+150℃ 1 Independent 100uA@60V 3A 60V 700mV@3A 80A DO-27 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 9 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R21, R22, R23, R24, R25, R26, R27, R28 |
| 8 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13, R14, R15, R16, R17, R18, R19 |
| 6 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4, C5, C6 |
| 5 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R29, R30 |
| 5 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6, R7, R9, R10 |
| 5 | 74LS193 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U4, U5, U6, U7, U8 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J5, J7, J8, J9 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J11, J12 |
| 2 | 10n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C17, C18 |
| 2 | 10u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C19, C22 |
| 2 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R11 |
| 2 | BS170 | Package_TO_SOT_THT:TO-92_Wide | Q1, Q2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R31 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 370u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C20 |
| 1 | 47n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C21 |
| 1 | 74LS01 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3 |
| 1 | 74LS33 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U2 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | ESD | Symbol:ESD-Logo_6.6x6mm_SilkScreen | FID1 |
| 1 | F1.6A | Fuse_HTL:Fuse_20mm_HTL | F1 |
| 1 | Green | LED_THT:LED_D5.0mm | D2 |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U11 |
| 1 | NA555P | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U9 |
| 1 | OH | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | FID3 |
| 1 | QR | Images:QR_0x007e_small | FID4 |
| 1 | SB360 | Diode_THT:D_DO-201_P15.24mm_Horizontal | D1 |
| 1 | SST39SF040 | Package_DIP:DIP-32_W15.24mm_LongPads | U10 |
| 1 | Speaker | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | LS1 |
| 1 | Waste | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | FID2 |
| 1 | uA7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
Questions
How big is the Tgn PCB?
It measures 110.7 × 74.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tgn use?
92 parts, built around the LM386, 74LS193P-E, 74LS33PC and NA555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tgn KiCad files?
From the 0x007E/tgn repository on GitHub, at the commit this page was made from: the board is pcb/TGN.kicad_pcb and its schematic pcb/TGN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tgn design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.
Similar boards
- 2 layers100.4 × 96 mm
Xt cf
monotech/XT-CF-RA
Rear-accessible XT-CF Bootable 8-bit ISA CompactFlash - no bracket machining required
34 parts6GPL-3.0 - 2 layers180 × 58 mm
Handheld sstc
automagicle/handheld-sstc
A handheld SSTC project on PCB, designed for a large magic wand form factor, entirely powered from 8s 18650. Uses direct secondary feedback with gate driver and MOSFETs, and 555 interrupter
66 parts1 - 2 layers99.7 × 48.8 mm
AC DC Wandler
MoElashmawi/Flyback-AC-DC-Converter
Flyback AC-DC Converter (230V AC to 12V DC) — Full SMPS design using VIPer22A PWM Controller. Schematic, PCB layout & 3D render in KiCad.
34 parts1MIT - 2 layers100 × 56.5 mm
Pi dash input hat
outlandfabworks/overdash
Open-source Raspberry Pi vehicle dashboard. Reads CAN (J1939), OBD-II, Megasquirt/Speeduino, GPS, and GPIO — streams to a canvas-based kiosk frontend with a visual no-code layout editor.
68 partsMIT - 2 layers49.5 × 57.2 mm
- 2 layers101.6 × 137.4 mm
- 2 layers100 × 80 mm
