
Picoloader
Auroxin/picoloader-hw
Open-hardware PicoLoader for the Nintendo GameCube: a solderless RP2040 modchip. KiCad 10 sources for the v1.1A (2 MB) and v1.2A (16 MB) boards, the 30-pin flex PCB and the 3D-printed mounting parts. GPL-2.0.

Open-hardware PicoLoader for the Nintendo GameCube: a solderless RP2040 modchip. KiCad 10 sources for the v1.1A (2 MB) and v1.2A (16 MB) boards, the 30-pin flex PCB and the 3D-printed mounting parts. GPL-2.0.
Flex is an open-source printed circuit board by Auroxin, from the Auroxin/picoloader-hw repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 98.5 × 61 mm with 2 parts on 25 nets, routed with 513 tracks and 83 vias.
Its parts include 1 IC and 1 connector. It belongs with the retro computing and games boards and the RP2040 boards of this library.

The 30-pin flex that connects the main board to the console. It taps the DVD-drive flex
connector with DVDCN_FLEX_PADS, so the install needs no soldering.
Library:DVDCN_FLEX_PADS on the DVD-drive side, Library:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_pad
for the FFC to the main boardGamecubeConnectors.kicad_sym and both project footprints ship with the project, so the
schematic opens without missing-library warningsThe flex is shared by every board revision; the silkscreen still reads Rev1.1 because the
outline has not changed since. See ../../3d-print/ for the
Fold_KeyV1.2.stl part that creases the cable at the right position.
Open Flex.kicad_pro with KiCad 10 or newer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x30 | Library:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_pad | J1 |
| 1 | ~ | Library:DVDCN_FLEX_PADS | U1 |

Auroxin/picoloader-hw
Open-hardware PicoLoader for the Nintendo GameCube: a solderless RP2040 modchip. KiCad 10 sources for the v1.1A (2 MB) and v1.2A (16 MB) boards, the 30-pin flex PCB and the 3D-printed mounting parts. GPL-2.0.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 98.5 × 61 mm and has 2 copper layers, 0.8 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Auroxin/picoloader-hw repository on GitHub, at the commit this page was made from: the board is hw/flex/Flex.kicad_pcb and its schematic hw/flex/Flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).