
AZ80 Proto
attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.
AZ80 DIO is an open-source printed circuit board by attraktorhh, from the attraktorhh/aZ80_Computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 110.3 × 58.3 mm with 54 parts on 76 nets, routed with 595 tracks and 19 vias.
It is built around the 74LS245SC and 74LS374PC. Its parts include 17 resistors, 14 diodes, 8 switches, 5 connectors and 3 capacitors.
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.
Das RAM wird im oberen Teil des Addressraums eingeblendet ($8000-$FFFF).
Die LED zeigt einen Zugriff auf den Arbeitsspeicher an.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | LED_Small | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6, R7, R8 |
| 6 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D9, D10, D11, D12, D13, D14 |
| 3 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3 |
| 1 | 74LS138 | Package_DIP:DIP-16_W7.62mm_LongPads | U3 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_LongPads | U2 |
| 1 | 74LS374 | Package_DIP:DIP-20_W7.62mm_LongPads | U1 |
| 1 | 8 x 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 8 x 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Atari_Joystick | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1 |
| 1 | Input | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | LOGO | Backplane:Z80_inside | G*** |
| 1 | LOGO | Backplane:attraktor | G*** |
| 1 | LOGO | Backplane:osh_logo | G*** |
| 1 | Output | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | Pin 8 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP1 |
| 1 | Port Select | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | Z80 Bus | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Horizontal | J4 |

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.

attraktorhh/aZ80_Computer
Die RAM Platine stellt den 32KB großen flüchtigen Arbeitsspeicher dem aZ80 Retro System zur Verfügung.


tjboldt/ProDOS-ROM-Drive
A bootable 1 MB solid state disk for Apple ][ computers

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics


fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

djtersteegc/Tandy-Color-Computer-Multi-Pak
Respin of the Tandy 26-3024 Multi-Pak (MPI) for the DIY builder.

It measures 110.3 × 58.3 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the 74LS245SC and 74LS374PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the attraktorhh/aZ80_Computer repository on GitHub, at the commit this page was made from: the board is Hardware/aZ80_DIO/aZ80_DIO.kicad_pcb and its schematic Hardware/aZ80_Backplane/Backplane_V1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).