
Rp2040-basic m1
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH

A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
Rp2040-basic m1 - Copy is an open-source printed circuit board by AtrivaTECH, from the AtrivaTECH/picuno repository on GitHub. It is a 2-layer board with 41 parts on 58 nets, routed with 452 tracks and 30 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 15 capacitors, 9 connectors, 8 resistors, 3 ICs and 3 diodes. It belongs with the RP2040 boards of this library.
Kicad Files for 2.1 with level shifters on GPIO 0-5 and reset pin added.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C7, C8, C9, C10, C11 |
| 3 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R33 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R16 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C12 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 27p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J6 |
| 2 | D_Schottky | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | AZ1117CH-3.3TRG1 SOT223-3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Crystal 12 Mhz | Crystal:Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm_HandSoldering | Y1 |
| 1 | D_TVS_Dual_AAC | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | TACT SW | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
The 40 most common of 41 parts.

AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH

AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH

AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH

AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH


shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.


41 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AtrivaTECH/picuno repository on GitHub, at the commit this page was made from: the board is RP2040/v2/kicad/v2.1/rp2040-basic-m1 - Copy.kicad_pcb and its schematic RP2040/old/rp2040-basic-m1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AtrivaTECH before reusing the design.