Skip to the content
2 layers100 × 100 mmEEE Project, the printed circuit board in 3D

3rd year Mechatronics PCB design project

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
78
Pads
252
Tracks, vias
579, 75
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
5 Jul 2026
Updated
5 Jul 2026

Overview

EEE Project is an open-source printed circuit board by astronaut3zc, from the astronaut3zc/DoA-Project-2026 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 94 parts on 78 nets, routed with 579 tracks and 75 vias.

It is built around the MCP6004-E/P and ZTS6117H. Its parts include 40 resistors, 24 capacitors, 5 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

DoA-Project-2026

3rd year Mechatronics PCB design project

Direction of Arrival (DoA) Microphone Pre-amp Array

A dual-channel, high-precision hardware and software system designed to calculate the acoustic Direction of Arrival (DoA) using an interleaved microphone array. The project features an analog conditioning pipeline, high-speed ADC sampling, and digital signal processing to compute phase/time-delay differences.

🚀 Overview

This repository hosts the hardware design files, firmware, and performance analysis for a spatial audio tracking system. The core architecture uses a dual-microphone array to capture incident sound waves, condition the signal via a custom-designed low-noise pre-amplifier, and process the data on an ARM Cortex-M4 microcontroller to extract the sound source angle.

Key Performance Metrics

  • Mean Absolute Error (MAE): $9.8^\circ$ across tested acoustic environments.
  • Architecture: Dual-channel analog phase-matched pipeline.

🛠️ Hardware Architecture

1. Analog Front-End (AFE)

The analog subsystem conditions the weak electret/MEMS microphone signals for the microcontroller's ADC.

  • Operational Amplifiers: MCP6004 quad op-amp configuration (chosen for rail-to-rail performance and low cost).
  • Signal Chain:
    • Low-noise pre-amplification stage.
    • Active Butterworth bandpass filtering to isolate human speech frequencies and eliminate high-frequency aliasing.
  • Component Optimization: Designed strictly around the E12 resistor/capacitor series to ensure compatibility with standard manufacturing and eliminate "Extended Part" sourcing fees.

2. Digital & Processing Stage

  • Microcontroller: STM32G431CBT6 (ARM Cortex-M4 running at high clock speed).
  • Sampling Strategy: High-frequency, synchronized dual-channel ADC sampling to maintain phase coherence between channels.
  • Pin Configuration Note: Dedicated hardware reset is bound strictly to the NRST pin (no shared GPIO mapping on this line) to guarantee system stability during power-up sequencing.

📊 Performance & Forensic Analysis

The system underwent rigorous tracking validation to benchmark the angular calculation against true physical sound sources.

  • Calculated Precision: The spatial tracking algorithm achieved a highly robust Mean Absolute Error (MAE) of $9.8^\circ$.
  • Error Sources: Forensic evaluation of the error bounds indicated slight phase mismatches in the analog tolerances of the dual MCP6004 paths and high-frequency acoustic reflections, which can be mitigated via digital calibration matrices in future iterations.

📁 Repository Structure

text
├── hardware/           # KiCad schematics, PCB layout files, and Gerber outputs
├── firmware/           # STM32CubeIDE project files, ADC drivers, and DSP source code
├── analysis/           # Python/MATLAB scripts used for the MAE forensic evaluation

Parts

94
QtyValueFootprintReferences
10100nFCapacitor_SMD:C_0805_2012MetricC2, C3, C15, C16, C17, C18, C19, C20, C21, C22
810KResistor_SMD:R_0805_2012MetricR1, R2, R10, R12, R28, R32, R33, R37
810nFCapacitor_SMD:C_0805_2012MetricC5, C6, C8, C9, C10, C11, C12, C13
83.9KResistor_SMD:R_0805_2012MetricR15, R16, R22, R23, R25, R26, R29, R30
8TestPointTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP_GND, TP_MIC1, TP_MIC2, TP_SIGNAL1, TP_SIGNAL2, TP_VCC, TPAMP1, TPAMP2
71KResistor_SMD:R_0805_2012MetricR3, R6, R14, R19, R35, R36, R38
415KResistor_SMD:R_0805_2012MetricR7, R9, R17, R20
41uFCapacitor_SMD:C_1206_3216MetricC4, C14, C23, C24
433KResistor_SMD:R_0805_2012MetricR4, R5, R13, R18
4Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2, JP3, JP4
3TestpointTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP_BIAS, TP_SCL, TP_SDA
21.5KResistor_SMD:R_0805_2012MetricR11, R27
2100Resistor_SMD:R_0805_2012MetricR39, R40
210uFCapacitor_SMD:C_1206_3216MetricC1, C7
212KResistor_SMD:R_0805_2012MetricR8, R31
24.7KResistor_SMD:R_0805_2012MetricR21, R24
2LED_SmallLED_SMD:LED_0805_2012MetricD1, D2
2LOGOLOGOG***, G***
2MCP6004JLC Footprints:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BLU1, U2
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
2ZTS6117HJLC Footprints:MIC-SMD_4P-L2.8-W1.9-P1.84-TL_ZTS6117U4, U6
1330Resistor_SMD:R_0805_2012MetricR34
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1FerriteBead_SmallInductor_SMD:L_0805_2012MetricFB1
1STM32G431CBTxJLC Footprints:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BLU3
1SW_PushButton_Switch_SMD:SW_SPST_TL3342SW1

Similar boards

  • 4 layers100 × 174.6 mmRf switchboard, the printed circuit board in 3D

    Rf switchboard

    Erhannis/rf_switchboard

    KiCAD pcb; whole heap of rf-related modules so I can figure out what works and how.

    467 parts
  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587
  • 4 layers60 × 94 mmDaisySeedPedal125b, the printed circuit board in 3D

    DaisySeedPedal125b

    bkshepherd/DaisySeedProjects

    A collection of hardware and software projects based around the Electro-Smith Daisy Seed

    80 parts559MIT
  • 2 layers75 × 100 mmPhased, the printed circuit board in 3D

    Phased

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    77 parts530
  • 2 layers66 × 99 mmNucleo32TNC, the printed circuit board in 3D

    Nucleo32TNC

    mobilinkd/NucleoTNC

    The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

    54 parts110GPL-3.0
  • 2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    westlicht/performer-hardware

    PER|FORMER Eurorack Sequencer - Hardware Design Files

    435 parts110
  • 4 layers29 × 20.9 mmWideband controller, the printed circuit board in 3D

    Wideband controller

    mck1117/wideband

    The firmware/boards directory contains configuration for each board this firmware supports.

    60 parts81MIT

Questions

How big is the EEE Project PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EEE Project use?

94 parts, built around the MCP6004-E/P and ZTS6117H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EEE Project KiCad files?

From the astronaut3zc/DoA-Project-2026 repository on GitHub, at the commit this page was made from: the board is EEE Project.kicad_pcb and its schematic EEE Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EEE Project design in my own project?

Its repository states no licence, so its author keeps all rights: ask astronaut3zc before reusing the design.