2 layers86.4 × 53.3 mm
2 layers31 × 31 mm
Trigger
aspro648/KiCad33My design files. Abandon all hope ye who enter here.
- Size
- 31 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 14
- Pads
- 60
- Tracks, vias
- 155, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Trigger is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 31 × 31 mm with 23 parts on 14 nets, routed with 155 tracks and 0 vias.
It is built around the 74LS14PC. Its parts include 8 resistors, 5 connectors, 4 capacitors and 1 IC.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | footprints:C_Disc_D3.4mm_W2.1mm_P2.50mm | C6, C7, C8, C10 |
| 4 | 10K | footprints:R__P5.08mm | R4, R6, R10, R19 |
| 4 | 1K | footprints:R__P5.08mm | R5, R7, R11, R18 |
| 4 | JMPR | footprints:JMPR | JP1, JP2, JP3, JP4 |
| 1 | 74LS14 | footprints:DIP-14_W7.62mm | U7 |
| 1 | BUTTON | Connectors_Molex:Molex_PicoBlade_53047-0210_02x1.25mm_Straight | J21 |
| 1 | LOGO | footprints:RS_left | G*** |
| 1 | PUSH | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J20 |
| 1 | REV | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J6 |
| 1 | TRIG | footprints:Pin_Header_Straight_2x01_Pitch2.00mm | J19 |
| 1 | TRIG_OUT | footprints:Molex_PicoBlade_53048-0610_06x1.25mm_Angled | J22 |
Questions
How big is the Trigger PCB?
It measures 31 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Trigger use?
23 parts, built around the 74LS14PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trigger KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Nerf/ArduStryfe/archive/design_files V04/trigger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trigger design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.
More from aspro648/KiCad
12- 2 layers64 × 40 mm
- 2 layers86.4 × 53.3 mm
- 2 layers128 × 75 mm
- 2 layers128 × 75 mm
- 2 layers42 × 18 mm
- 2 layers80 × 38 mm
- 2 layers132 × 75 mm
- 2 layers42 × 18 mm
- 2 layers90 × 64 mm
- 2 layers69.8 × 12.5 mm
- 2 layers64.8 × 50.8 mm
Similar boards
- 2 layers231.1 × 106.7 mm
- 2 layers304.8 × 165.1 mm
Comix-35
schlae/comix-35
The COMIX-35 is an improved clone of the COMX-35 1802 home computer
173 parts138 - 4 layers184.9 × 243.8 mm
Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 4 layers62.5 × 83.8 mm
- 2 layers170.2 × 100 mm
Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers33.7 × 56.5 mm
Lumafix
tebl/C64-Lumafix
An easier to solder version of the Lumafix board, components spaced out a bit more to make things easier on the beginner (mostly meaning me).
12 parts39 - 2 layers162.2 × 134.6 mm
- 4 layers170 × 181 mm
