

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 32 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 11
- Pads
- 46
- Tracks, vias
- 154, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 32 × 23 mm with 12 parts on 11 nets, routed with 154 tracks and 7 vias.
It is built around the ATTINY85-15M and ZXBM5210-S. Its parts include 5 connectors, 2 capacitors, 2 ICs and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-15M
WQFN-20-EP(4x4)-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)ZXBM5210-S
SO-8-40℃~+85℃ 1.5A 1.72Ω 3V~18V 850uA Interleaved conduction protection、Current sensing/regulation function、Active braking function SO-8 Brushed DC Motor Drivers ROHSDiodes IncorporatedBrushed DC Motor Drivers
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | footprints:C_0805_HandSoldering | C1 |
| 1 | 10uF | footprints:CP_Elec_5x5.3 | C2 |
| 1 | ACCEL | footprints:Pot_Bourns_TC33 | RV2 |
| 1 | ATTINY85 | footprints:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U2 |
| 1 | AVR-ISP-6 | footprints:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | BATT_IN | footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | JMP | footprints:R_0603 | R1 |
| 1 | MTR_OUT | footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | SIG_IN | footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | SPEED | footprints:Pot_Bourns_TC33 | RV1 |
| 1 | VCC | footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | ZXBM5210 | footprints:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U1 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers178.3 × 100.1 mm

- 2 layers83 × 71 mm

- 4 layers112 × 52 mm

Beerator
Artpel1805/Beerator
Le but du projet est de réaliser intégralement un robot capable de se déplacer, de chercher et d’attraper une canette (de bière ? 😶), relever sa couleur, puis de la déposer dans la zone de couleur correspondante.
56 parts2 - 2 layers87.6 × 83.8 mm

ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 2 layers36.8 × 69.2 mm

- 4 layers110 × 50 mm

Projet robot ESE
Groupe-Projet-ESE/BeerRobot
Chelsea COMLAN - Alix HAVRET - Loïcia KOEHL - Quentin SIMON
68 parts - 4 layers113.1 × 57 mm

- 4 layers90 × 70 mm

Kyttiludzinator
Lazorme/Ludz-le-chat
The Lidar and motor drivers are in drvLIDAR and drvMotor, respectively.
116 parts
Questions
How big is the Design files PCB?
It measures 32 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
12 parts, built around the ATTINY85-15M and ZXBM5210-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Attiny/Attin85_HBridge/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.