Skip to the content
2 layers31 × 100 mmDesign files 32U4, the printed circuit board in 3D

Design files 32U4

aspro648/KiCad33

My design files. Abandon all hope ye who enter here.

Size
31 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
42
Pads
145
Tracks, vias
491, 20
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
13 Dec 2022

Overview

Design files 32U4 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 31 × 100 mm with 42 parts on 42 nets, routed with 491 tracks and 20 vias.

It is built around the ATMEGA32U4-AU and RJ45. Its parts include 14 resistors, 5 connectors, 4 diodes, 3 capacitors and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

KiCad

My design files. Abandon all hope ye who enter here.

Parts

42
QtyValueFootprintReferences
4JMPfootprints:JumperR1, R2, R3, R8
2100footprints:R_0805R10, R11
210Kfootprints:R_0805R9, R12
222footprints:R_0805R6, R7
2330footprints:R_0805R13, R14
24K7footprints:R_0805R4, R5
2IRfootprints:IR_LEDD7, D8
2LEDLEDs:LED_D5.0mmD5, D6
2Q_Photo_NPNfootprints:PHOTOTRANSQ1, Q2
10.1uFfootprints:C_0805C1
110uFfootprints:C_0805C3
11uFfootprints:C_0805C2
18 Mhzbeetje_footprints:Resonator_SMD_CTSC_1.3mmx3.2mmY1
1ATMEGA32U4-AUbeetje_footprints:TQFP-44_10x10mm_Pitch0.8mmU1
1D4Buttons_Switches_THT:SW_PUSH_6mmSW1
1I2CConnectors_Molex:Molex_PicoBlade_53048-0410_04x1.25mm_AngledJ1
1ISPbeetje_footprints:Pin_Header_Straight_2x03_Pitch2.54mmCON1
1MadeInOregonRev25myFootPrints:MadeInOregonRev25VAL
1Polyfusebeetje_footprints:R_1206F1
1RJ45Connectors:RJ45_8J2
1SERVOPin_Headers:Pin_Header_Angled_1x03_Pitch2.54mmJ4
1SERVO_1Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mmJ3
1USBbeetje_footprints:USB_Micro-B_Molex-105017-0001X1

The 34 most common of 42 parts.

More from aspro648/KiCad

12
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    121 parts33
  • 2 layers64 × 40 mmBase, the printed circuit board in 3D

    Base

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    102 parts33
  • 2 layers86.4 × 53.3 mmDesign files, the printed circuit board in 3D

    Design files

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    100 parts33
  • 2 layers128 × 75 mmDesign files V03, the printed circuit board in 3D

    Design files V03

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    87 parts33
  • 2 layers128 × 75 mmDesign files V04, the printed circuit board in 3D

    Design files V04

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    84 parts33
  • 2 layers42 × 18 mmDesign files V0.3, the printed circuit board in 3D

    Design files V0.3

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    83 parts33
  • 2 layers80 × 38 mmA main, the printed circuit board in 3D

    A main

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers132 × 75 mmDesign files V05, the printed circuit board in 3D

    Design files V05

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    81 parts33
  • 2 layers42 × 18 mmDesign files V0.5, the printed circuit board in 3D

    Design files V0.5

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers90 × 64 mmProject - Copy, the printed circuit board in 3D

    Project - Copy

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers69.8 × 12.5 mmLEGO LED, the printed circuit board in 3D

    LEGO LED

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    80 parts33
  • 2 layers64.8 × 50.8 mmRPB, the printed circuit board in 3D

    RPB

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    77 parts33

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layers73.9 × 84.5 mmAei, the printed circuit board in 3D

    Aei

    Severson-Group/AMDC-Hardware

    Circuit board designs for controlling advanced motor systems

    54 parts51

Questions

How big is the Design files 32U4 PCB?

It measures 31 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Design files 32U4 use?

42 parts, built around the ATMEGA32U4-AU and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Design files 32U4 KiCad files?

From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/IR/design_files_32U4/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Design files 32U4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.