

Design files Attiny826 V1
My design files. Abandon all hope ye who enter here.
- Size
- 22 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 24
- Pads
- 89
- Tracks, vias
- 257, 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files Attiny826 V1 is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 22 × 18 mm with 27 parts on 24 nets, routed with 257 tracks and 20 vias.
It is built around the ATTINY826-MU and SK6812MINI-E. Its parts include 9 resistors, 8 connectors, 4 capacitors, 2 diodes and 2 fuses. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY826-MU
VQFN-20(3x3)-40℃~+85℃ 1.8V~5.5V 128Byte 12bit 18 1KB 20MHz 8 Bit 8KB AVR Built-in FLASH VQFN-20(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100 | footprints:R_0603 | R3, R4, R5, R6, R7, R10, R11 |
| 2 | 1uF | footprints:C_0603 | C3, C4 |
| 2 | PTC | footprints:R_0805_HandSoldering | F1, F2 |
| 2 | SK6812MINI | footprints:WS2812B-2020 | D0, D7 |
| 1 | 0.1uF | footprints:C_0603 | C2 |
| 1 | 1 | footprints:R_0603 | R1 |
| 1 | 10uF | footprints:C_0805 | C1 |
| 1 | 2 | footprints:R_0603 | R2 |
| 1 | ATtiny826 | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | BAT | footprints:PIN_HEADER_LED | J2 |
| 1 | CHG | footprints:Connector_Molex_PicoBlade_53047-0210 | J3 |
| 1 | FL | footprints:Pin_Header_THD_1x03 | J7 |
| 1 | HL | footprints:Pin_Header_THD_1x03 | J5 |
| 1 | I2C | footprints:PinHeader_1x03_P2.00mm_Vertical | J8 |
| 1 | JST-SH | footprints:JST_SH_SM02B_hand_solder | J1 |
| 1 | SW_SPDT | footprints:JS102011SCQN | SW1 |
| 1 | TL | footprints:Pin_Header_THD_1x03 | J6 |
| 1 | UDPI | footprints:PinHeader_1x03_P2.00mm_Vertical | J4 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 6 layers45.5 × 96 mm

- 2 layers69 × 76 mm

Varun nr at826 rx
dlsingh/temp_varun_rx_ant_UFL
This repository is temporary reposerotory, that contain files related to varun RX with UFLantenna
54 parts - 4 layers234 × 84 mm

Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
234 parts3kApache-2.0 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers48 × 32 mm

FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
106 parts575GPL-2.0 - 2 layers

Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
62 parts517GPL-2.0 - 4 layers82.5 × 39.4 mm

V4head
makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.
26 parts493GPL-3.0
Questions
How big is the Design files Attiny826 V1 PCB?
It measures 22 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files Attiny826 V1 use?
27 parts, built around the ATTINY826-MU and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files Attiny826 V1 KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/HotWheels/Attiny/design_files Attiny826 V1/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files Attiny826 V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.