

Design files MOSFET
My design files. Abandon all hope ye who enter here.
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 17
- Pads
- 30
- Tracks, vias
- 33, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files MOSFET is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 10 parts on 17 nets, routed with 33 tracks and 0 vias.
It is built around the IRLB8721PBF. Its parts include 4 connectors, 2 resistors, 2 diodes and 1 transistor.
Main components
1README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | footprints:TerminalBlock_bornier-2_P5.08mm | J1, J3 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 1K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | Beetje_Bottom | beetje_footprints:Beetje_Bottom | J2 |
| 1 | Beetje_Top | beetje_footprints:Beetje_Top | J4 |
| 1 | D | footprints:D_SOD-123F | D1 |
| 1 | IRLB8721 | TO_SOT_Packages_THT:TO-220-3_Horizontal | Q1 |
| 1 | LED | LEDs:LED_0805_HandSoldering | D6 |
| 1 | MadeInOregonRev25 | footprints:MadeInOregonRev25 | VAL |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers50.8 × 28.6 mm

Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0 - 2 layers99.1 × 99.1 mm

- 2 layers36 × 31 mm

ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm

- 4 layers104.2 × 77.7 mm

- 4 layers69.9 × 44.5 mm

DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm

- 2 layers33.8 × 49.5 mm

EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1
Questions
How big is the Design files MOSFET PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files MOSFET use?
10 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files MOSFET KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/Beetje/design_files_MOSFET/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files MOSFET design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.