
HCIPCB ATSAMD21G18 template
asprgchong/HCI-Engineering-and-PCB
Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes

Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes
Pcb final is an open-source printed circuit board by asprgchong, from the asprgchong/HCI-Engineering-and-PCB repository on GitHub. It is a 2-layer board of 135.5 × 77 mm with 63 parts on 45 nets, routed with 834 tracks and 121 vias.
It is built around the ATSAMD21G18A-AU, APDS-9960 and TLV73333PQDBVRQ1, with the USB4105-GF-A, OWS-111535LA-8H and SSSS810701 among its other parts. Its parts include 19 resistors, 10 capacitors, 7 diodes, 7 connectors and 6 switches. It belongs with the SAM D and SAM boards of this library.
Project Files from my HCI PCB and HCI Eng classes with Professor Pedro Lopes
Components and Schematic Design (Problems in the wiring of the SLA and SCL of the light sensor to the correct pins on the SAMD21- same for the OLED screen)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 6 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C6, C7 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C9, C10 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 2 | 15uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | ATSAMD21G18A-A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1, U1 |
| 2 | GND_Test | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2 |
| 2 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 2 | TLV73333PQDBVRQ1 | hcipcb:SOT95P280X145-5N | U2, U2 |
| 2 | USB4105-GF-A | hcipcb:GCT_USB4105-GF-A | J1, J1 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | APDS-9960 | Sensor:Avago_APDS-9960 | U4 |
| 1 | Conn_01x04_Socket | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J4 |
| 1 | Conn_02x04_Top_Bottom | Connector_PinSocket_2.00mm:PinSocket_2x04_P2.00mm_Vertical | J5 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | FB-30R | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | LED_Small | Diode_SMD:D_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D4 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | OWS-111535LA-8H | hcipcb:OWS-111535LA-8H | LS1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical_HandSoldering | RV1 |
| 1 | SSSS810701 | hcipcb:SSSS810701 | J3 |
| 1 | SWD_TAG-CONNECT | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | TAG-CONNECT | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |

asprgchong/HCI-Engineering-and-PCB
Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes

LukeAndreesen/studyPCB
A Study Timer PCB Project - hold yourself accountable by setting the timer, attaching your phone to the detector, and sitting in front of the module.





pierreca/jimothy-sao
A DEF CON 34 simple add-on featuring Jimothy the Seattle raccoon.

Tokoro0917/ToraNeko.Mk3
KiCadプロジェクト本体(TORANEKO.Mk3.kicadpro / .kicadsch / .kicadpcb)を作成済みです(現状は空、これから回路図を起こしていきます)。 このディレクトリには、実際に回路図を起こす前に固めておいた機能ブロック構成・ペリフェラル割り当て案・BOMドラフトも一緒に置いています。

It measures 135.5 × 77 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the ATSAMD21G18A-AU, APDS-9960, TLV73333PQDBVRQ1 and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the asprgchong/HCI-Engineering-and-PCB repository on GitHub, at the commit this page was made from: the board is PCB_smartGlasses/pcb_final.kicad_pcb and its schematic PCB_smartGlasses/hciPCB_final/HCIPCB_ATSAMD21G18_template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask asprgchong before reusing the design.