Skip to the content
2 layers39.4 × 41.4 mmJimothy sao, the printed circuit board in 3D

A DEF CON 34 simple add-on featuring Jimothy the Seattle raccoon.

Size
39.4 × 41.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
25
Pads
47
Tracks, vias
47, 4
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Aug 2026
Updated
6 Aug 2026

Overview

Jimothy sao is an open-source printed circuit board by pierreca, from the pierreca/jimothy-sao repository on GitHub. It is a 2-layer board of 39.4 × 41.4 mm with 10 parts on 25 nets, routed with 47 tracks and 4 vias.

It is built around the CH32V003F4P6, KT-0603R and SSSS810701, with the TS342A2P among its other parts. Its parts include 2 capacitors, 2 resistors, 2 diodes, 2 switches and 1 IC. It belongs with the RISC-V boards of this library.

Main components

4

README

README.md

Jimothy SAO

A DEF CON 34 simple add-on featuring Jimothy the Seattle raccoon.

Repository layout

  • hardware/ — KiCad schematic, PCB, libraries and manufacturing references
  • firmware/ — CH32V003 firmware
  • artwork/ — source artwork and PCB-ready SVG exports
  • docs/ — design decisions, pin mappings and bring-up notes

Parts

10
QtyValueFootprintReferences
2220Resistor_SMD:R_0402_1005MetricR1, R2
2AMBERjimothy_sao:LED-SMD_L1.6-W0.8-R-RDLED1, LED2
1100nFCapacitor_SMD:C_0402_1005MetricC2
11uFCapacitor_SMD:C_0402_1005MetricC1
1CH32V003F4P6jimothy_sao:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BLU1
1SAOConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1SSSS810701jimothy_sao:SW-SMD_SSSS810701SW1
1TS342A2Pjimothy_sao:SW-SMD_L4.0-W3.0-LS5.0-EHSW2

Similar boards

  • 2 layers20.6 × 28.9 mmESP32 C3 FOB, the printed circuit board in 3D

    ESP32 C3 FOB

    rohith-scandron/SHAKE_FOB_REV-A

    A PCB keychain: a shake-activated OLED "digital pet" fob. Sleeps at 0 µA-class draw until shaken, wakes and shows an emoji/gif on a small I2C OLED, advances to the next one on a gentle shake, and sleeps again after 10 s…

    53 parts
  • 2 layers16.9 × 29.7 mmArm 20to10, the printed circuit board in 3D

    Arm 20to10

    noahp/arm_20to10

    20-pin to 10 pin ARM JTAG/SWD adapter board

    10 parts3
  • 2 layers92.9 × 54.5 mmSaponseEx, the printed circuit board in 3D

    SaponseEx

    hide4096/SaponseEx

    91 parts1
  • 2 layers47.4 × 64 mmTORANEKO.Mk3, the printed circuit board in 3D

    TORANEKO.Mk3

    Tokoro0917/ToraNeko.Mk3

    KiCadプロジェクト本体(TORANEKO.Mk3.kicadpro / .kicadsch / .kicadpcb)を作成済みです(現状は空、これから回路図を起こしていきます)。 このディレクトリには、実際に回路図を起こす前に固めておいた機能ブロック構成・ペリフェラル割り当て案・BOMドラフトも一緒に置いています。

    93 parts1MIT
  • 4 layers45 × 35 mmESPLionV1, the printed circuit board in 3D

    ESPLionV1

    Angus-McIntyre/ESPLionV1

    124 parts
  • 2 layers135.5 × 77 mmPcb final, the printed circuit board in 3D

    Pcb final

    asprgchong/HCI-Engineering-and-PCB

    Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes

    63 parts
  • 2 layers69.6 × 66.4 mmPomodoro pal, the printed circuit board in 3D

    Pomodoro pal

    HeyPCB/pomodoro-pal

    Pomodoro Pal: A tomato on your desk that keeps you focused for 25 minutes, without your phone. KiCad 10, heypcb.ai merch.

    41 partsCERN-OHL-S-2.0

Questions

How big is the Jimothy sao PCB?

It measures 39.4 × 41.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Jimothy sao use?

10 parts, built around the CH32V003F4P6, KT-0603R, SSSS810701 and TS342A2P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jimothy sao KiCad files?

From the pierreca/jimothy-sao repository on GitHub, at the commit this page was made from: the board is hardware/jimothy_sao.kicad_pcb and its schematic hardware/jimothy_sao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jimothy sao design in my own project?

Its repository states no licence, so its author keeps all rights: ask pierreca before reusing the design.