

Micromouse 01 cp2
- Size
- 51.9 × 53 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 102
- Nets
- 114
- Pads
- 389
- Tracks, vias
- 936, 370
- Pours
- 97
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Oct 2023
- Updated
- 13 Dec 2024
Overview
Micromouse 01 cp2 is an open-source printed circuit board by Yujiro-13, from the Yujiro-13/micromouse_v2 repository on GitHub. It is a 4-layer board of 51.9 × 53 mm with 102 parts on 114 nets, routed with 936 tracks and 370 vias.
It is built around the ESP32-S3FH4R2, AS5047P-ATSM and MPU-6500, with the RTV-104DF333-S-40.000-TR, SMT-0440-S-R and MCM3400A-TP among its other parts. Its parts include 32 capacitors, 27 resistors, 14 ICs, 9 diodes and 4 transistors. It belongs with the ESP32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
8ESP32-S3FH4R2
QFN-56(7x7)-104.5dBm -40℃~+85℃ 2.4GHz 21dBm 340mA 3V~3.6V 88mA Bluetooth5.0 LX7 Chip UART、SDIO、SPI、I2C、JTAG QFN-56(7x7) WiFi Modules ROHSEspressif SystemsWiFi ModulesAS5047P-ATSM
TSSOP-14_4.4x5.0x0.65P-40℃~+125℃ 0°~360° 1.2mm 15mA 4.4mm 4.5V~5.5V 5mm Magnetic rotary position sensor No SPI TSSOP-14 Position Sensors ROHSAdvanced Monolithic SystemsPosition SensorsMPU-6500
QFN-24-40℃~+85℃ 16bit 6uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersRTV-104DF333-S-40.000-TR
SMD3225-4PTemperature Compensated Crystal Oscillators (TCXO)RaltronSMT-0440-S-R
--20℃~+70℃ 2.5mm 2V~4V 2mm 3V 4kHz 4mm 4mm 70dB 90mA Electromagnetic Passive (Externally Driven) Surface Mount - Buzzers ROHSPUI Audio, Inc.BuzzersMCM3400A-TP
DFN2020-6L-55℃~+150℃ 1.4W 1.5V 16nC@10V 2 N-Channel 30V 38mΩ@4.5V 50pF 58pF 5A 645pF DFN2020-6L MOSFETs ROHSMicro Commercial ComponentsMOSFETsESD9B3.3ST5G
SOD-923(0402)ESD And Surge Protection (TVS/ESD)TECH PUBLICSSSS810701
SMD-40℃~+85℃ 10,000 cycles 300mA 4.1mm 5V Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSALPSALPINESlide Switches
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C3, C11, C13, C14, C16, C17, C18, C25, C26, C27, C28, C29, C30, C31, C32 +6 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R9, R12, R15, R16, R25, R26, R30, R31 |
| 5 | 47k | Resistor_SMD:R_0402_1005Metric | R4, R8, R10, R14, R20 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R5, R7, R11, R13 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R24 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C19, C20, C22, C23 |
| 4 | LBR-127HLD | footprints:LBR-127HLD | U2, U3, U4, U5 |
| 4 | LED | LED_SMD:LED_0402_1005Metric | D3, D8, D9, D10 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric | C2, C10, C12 |
| 3 | MCM3400A-TP | footprints:DFN2020-6L_MCE | Q1, Q2, Q3 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R17, R22 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C15, C21 |
| 2 | AS5047P-ATSM | footprints:SOP65P640X120-14N | IC3, IC4 |
| 2 | CCS15S40,L3F | footprints:SOD-963 CST2C_TOS | D1, D2 |
| 2 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D4, D5 |
| 2 | MK06-4.5 | footprints:MK06-4.5 | M1, M2 |
| 1 | 0.01u | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 1.3k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 2.0nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 2.4k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 620 | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | DRV8835DSSR | footprints:DRV8835DSSR | IC5 |
| 1 | ESP32-S3FH4R2 | footprints:QFN40P700X700X90-57N-D | IC1 |
| 1 | Fan_Motor | footprints:MK06-4.5 | M3 |
| 1 | LXDC55FAAA-203 | footprints:CONV_LXDC55FAAA-203 | U6 |
| 1 | MPU-6500 | footprints:QFN40P300X300X95-25N-D | IC2 |
| 1 | PCA9632TK,118 | footprints:SON50P300X300X100-9N-D | IC6 |
| 1 | POWER | LED_SMD:LED_0402_1005Metric | D6 |
| 1 | RTV-104DF333-S-40.000-TR | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | U7 |
| 1 | SMT-0440-S-R | footprints:SMT-0440-S-R_PUI | U1 |
| 1 | SSM6J808R_LXHF | footprints:TSOP6F_SSM6J_TOS | Q4 |
| 1 | SSSS810701 | footprints:SSSS810701 | SW1 |
| 1 | SW_Push | footprints:BOOT_PAD | SW2 |
| 1 | USB_B_Micro | footprints:WURTH_614105150721 | J2 |
| 1 | WS2812-2020 | footprints:LED_WS2812-2020 | U8 |
The 94 most common of 102 parts.
More from Yujiro-13/micromouse_v2
2- 4 layers63.9 × 53 mm

- 4 layers38 × 53 mm

Similar boards
- 2 layers92.9 × 54.5 mm

- 2 layers47.4 × 64 mm

TORANEKO.Mk3
Tokoro0917/ToraNeko.Mk3
KiCadプロジェクト本体(TORANEKO.Mk3.kicadpro / .kicadsch / .kicadpcb)を作成済みです(現状は空、これから回路図を起こしていきます)。 このディレクトリには、実際に回路図を起こす前に固めておいた機能ブロック構成・ペリフェラル割り当て案・BOMドラフトも一緒に置いています。
93 parts1MIT - 2 layers100 × 72.8 mm

- 2 layers16.9 × 29.7 mm

- 2 layers39.4 × 41.4 mm

Jimothy sao
pierreca/jimothy-sao
A DEF CON 34 simple add-on featuring Jimothy the Seattle raccoon.
10 parts1 - 4 layers45 × 35 mm

- 2 layers135.5 × 77 mm

Pcb final
asprgchong/HCI-Engineering-and-PCB
Project Files and Demo videos from my HCI PCB and HCI Eng classes with Professor Pedro Lopes
63 parts - 2 layers102.7 × 56.8 mm

RecoveryBoard
psas/lv3.1-recovery
design, analysis, CAD, and testing for the LV3.1 recovery system
158 parts13
Questions
How big is the Micromouse 01 cp2 PCB?
It measures 51.9 × 53 mm and has 4 copper layers, 1 mm thick.
What parts does the Micromouse 01 cp2 use?
102 parts, built around the ESP32-S3FH4R2, AS5047P-ATSM, MPU-6500 and RTV-104DF333-S-40.000-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micromouse 01 cp2 KiCad files?
From the Yujiro-13/micromouse_v2 repository on GitHub, at the commit this page was made from: the board is micromouse_01_cp2.kicad_pcb and its schematic micromouse_01-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micromouse 01 cp2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yujiro-13 before reusing the design.