Skip to the content
2 layers47.8 × 46.7 mmRf controller, the printed circuit board in 3D

UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

Size
47.8 × 46.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
35
Pads
69
Tracks, vias
55, 8
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Nov 2021
Updated
6 Nov 2026

Overview

Rf controller is an open-source printed circuit board by ARTS-Laboratory, from the ARTS-Laboratory/SCUWLS repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 47.8 × 46.7 mm with 20 parts on 35 nets, routed with 55 tracks and 8 vias.

It is built around the NRF24L01P-R. It belongs with the radio and wireless and sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

SWaP-Constrained UAV-deployable Water-Level Sensor (SCUWLS)

UAV Deployable Stage Height Sensor with Magnetic Docking Mechanism

This work is discussed in two papers:

  1. Md Asifuzzaman Khan, Muhammad Usman Khan, Amanda Sarka, P. G. Tien Tran, Michelle Eigbe, Austin R. J. Downey, Jason D. Bakos, Erick Blasche, and Jasim Imran. Energy budget analysis of swap-constrained UAV-deployable water-level sensors with varying sampling intervals and idle currents. In SPIE Defense + Commercial Sensing 2026. SPIE, 2026
  2. Corinne Smith, Joud Satme, Jacob Martin, Austin R.J. Downey, Nikolaos Vitzilaios, and Jasim Imran. UAV rapidly-deployable stage sensor with electro-permanent magnet docking mechanism for flood monitoring in undersampled watersheds. HardwareX, 12:e00325, oct 2022. doi:10.1016/j.ohx.2022.e00325.

Hardware

drawing

Figure 1: The "Georgetown Version 0.5" of the sensor, showing (a) the assembled sensor package and (b) a cross-section view of the sensor.

drawing

Figure 2: Sensors deployed for continuous monitoring in the Charleston, SC area.

drawing

Figure 3: Drone delivering a sensor package underneath a structure using an Electro Permanent Magnet docking mechanism.

Versions

V0

  1. Data logging saved onto SD card
  2. Battery monitoring
  3. Solar load sharing
  4. Measures stage, temperature, pressure, humidity
  5. EPM with wireless toggling to attach under structures

V1 (projected)

  1. Adaptive sampling algorithm
  2. Wireless data transfer with GUI
  3. Camera integration

Licensing and Citation

CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Cite as:

@Misc{ARTSLabSwapConstrainedUav,
author = {{ARTS-L}ab},
howpublished = {GitHub},
title = {{SWaP-Constrained UAV-deployable Water-Level Sensor (SCUWLS)}},
groups = {{ARTS-L}ab},
url = {https://github.com/ARTS-Laboratory/SWaP-Constrained-UAV-deployable-Water-Level-Sensor},
}


QR code

https://github.com/ARTS-Laboratory/UAV-Deployable-Stage-Height-Sensor

Parts

20
QtyValueFootprintReferences
6LEDLED_SMD:LED_1206_3216MetricCH1, CH2, CH3, CH4, PWR, STATUS
6RResistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5, R6
1Arduino_Nano_v2.xModule:Arduino_NanoARDUINO NANO
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalPWM
1LOGOUofSC_logo_v2:uofsc_logo_0_75inG***
1nRF24L01+ARTS-Lab:nRF24L01+nRF24L01+

The 16 most common of 20 parts.

More from ARTS-Laboratory/SCUWLS

8
  • 2 layers40.6 × 78.5 mmKiCAD v4, the printed circuit board in 3D

    KiCAD v4

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    48 parts3CC-BY-SA-4.0
  • 2 layers40.6 × 78.5 mmWhs6, the printed circuit board in 3D

    Whs6

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    40 parts3CC-BY-SA-4.0
  • 2 layers40.6 × 82.6 mmEDA, the printed circuit board in 3D

    EDA

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    36 parts3CC-BY-SA-4.0
  • 2 layers40.6 × 82.6 mmEDA, the printed circuit board in 3D

    EDA

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    34 parts3CC-BY-SA-4.0
  • 2 layers40.6 × 78.5 mmEDA, the printed circuit board in 3D

    EDA

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    28 parts3CC-BY-SA-4.0
  • 2 layers37.5 × 64.8 mmWhs6, the printed circuit board in 3D

    Whs6

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    23 parts3CC-BY-SA-4.0
  • 2 layers40 × 40.1 mmMagdron mount, the printed circuit board in 3D

    Magdron mount

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    18 parts3CC-BY-SA-4.0
  • 2 layers56.5 × 53.9 mmController v1, the printed circuit board in 3D

    Controller v1

    ARTS-Laboratory/SCUWLS

    UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism

    18 parts3CC-BY-SA-4.0

Similar boards

  • 4 layers40 × 50 mmCrawler schematic, the printed circuit board in 3D

    Crawler schematic

    SySch415/MITE-ESC

    Electronic Speed Controller for SCX24 rock crawlers

    82 parts5MIT
  • 4 layers61.8 × 27.5 mmAudio Processing HW V1.0, the printed circuit board in 3D

    Audio Processing HW V1.0

    aitesam961/OpenADSP

    An Embedded Digital Signal Processing Device for Audio signals.

    83 parts4GPL-3.0
  • 2 layers40.6 × 78.5 mmBrooklyn, the printed circuit board in 3D

    Brooklyn

    ARTS-Laboratory/DOVE

    DOVE: Dynamics Observation and Vibration at the Edge. A deployable sensor package for vibration-based structural health monitoring.

    39 parts4CC-BY-SA-4.0
  • 2 layers50 × 90 mmPods, the printed circuit board in 3D

    Pods

    desertkun/pods

    Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.

    32 parts4
  • 2 layers21.6 × 48.3 mmRF Arduino Pro Mini, the printed circuit board in 3D

    RF Arduino Pro Mini

    etimou/Arduino-RF-Pro-Mini

    Arduino Pro Mini + nRF24L01P = Arduino-RF-Pro-Mini

    43 parts4
  • 2 layers75.9 × 72.4 mmOpenDTU, the printed circuit board in 3D

    OpenDTU

    plewka/ESP-Solar_OpenDTU

    PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...

    46 parts4GPL-3.0
  • 4 layers62 × 60 mmVESC 6.4, the printed circuit board in 3D

    VESC 6.4

    veazhang/VESC-6

    VESC 6.4 design

    429 parts4

Questions

How big is the Rf controller PCB?

It measures 47.8 × 46.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rf controller use?

20 parts, built around the NRF24L01P-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rf controller KiCad files?

From the ARTS-Laboratory/SCUWLS repository on GitHub, at the commit this page was made from: the board is system_design/Georgetown/V0.4.0/EDA/RF_controller/controller_v2/rf_controller/rf_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rf controller design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).