4 layers42.6 × 36.2 mm
2 layers50 × 90 mm
Pods
desertkun/pods4Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.
- Size
- 50 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 28
- Pads
- 161
- Tracks, vias
- 256, 27
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Mar 2018
- Updated
- 18 Mar 2019
Overview
Pods is an open-source printed circuit board by desertkun, from the desertkun/pods repository on GitHub. It is a 2-layer board of 50 × 90 mm with 32 parts on 28 nets, routed with 256 tracks and 27 vias.
It is built around the STM32F103RCT6, NRF24L01P-R and ADP1710AUJZ-R7, with the TP4056 among its other parts. Its parts include 8 capacitors, 6 ICs, 4 resistors and 1 connector. It belongs with the retro computing and games and lEDs and displays boards and the STM32 boards of this library.
Main components
4
STM32F103RCT6
LQFP-64(10x10)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 48KB 51 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
ADP1710AUJZ-R7
TSOT-5-40℃~+125℃@(Tj) 1 150mA 35uA 5.5V 800mV~5V Adjustable Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdpods
Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.
To compile this, you'll need to install the System Workbench for STM32 (requires an account to download).
The layout folder contains KiCad project for schematics.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6, C7, C8 |
| 6 | A | switches:SW_TH_Tactile_Omron_Fixed | BRESET1, SW_A1, SW_DOWN1, SW_LEFT1, SW_RIGHT1, SW_UP1 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R5 |
| 2 | 1mk | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 1 | ADP1710AUJZ | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4 |
| 1 | BATTERY | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill0.8mm | J1 |
| 1 | Buzzer | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill0.8mm | BZ1 |
| 1 | Jumper | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill0.8mm | JP_ID1 |
| 1 | POWER | Connector_Wire:SolderWirePad_1x03_P3.175mm_Drill0.8mm | SW_POW1 |
| 1 | SH1106 | sh1106:sh1106 | U7 |
| 1 | STM32F103RCT6 | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Horizontal | U5 |
| 1 | TP4056 | tp4056:tp4056 | U6 |
| 1 | nRF24L01+ | nrf24:NRF24L01 | U2 |
The 28 most common of 32 parts.
Similar boards
- 2 layers342.9 × 113.9 mm
Wisape board
wisape/fouraxis_board
the board use the stm32 then sensor use mpu6050, and hmc5883l and the wireless use nrf24l01
77 parts - 2 layers81 × 52 mm
Ir4stm32
but0n/IrDA-stm32
其中应用最广泛的是NEC协议。NEC标准规定: 红外通信的载波频率为38KHz, 占空比为1: 3；数据格式包括了引导码、用户码、数据码和数据码反码, 编码总占 32 位。数据反码是 数据码反相后的编码, 编码时可用于对数据的纠错。注意: 第二段的用户码也可以在遥控应用电路中被设置成第一段用户码的反码, 如下图所示:
76 parts54 - 2 layers120 × 90 mm
- 4 layers39 × 17 mm
- 4 layers
Stm32f103rct6
TylerJulian/STM32F103RCT6-Dev-Board
A stm32f103RCT6 Breakout board for Sooner Competitive Robotics and Personal use.
44 parts1 - 2 layers87.1 × 58.5 mm
Panel
ConfusedHello/STorM32-NT
A fork of the STorM32 NT controller board for my own purposes.
217 parts - 4 layers100 × 100 mm
Questions
How big is the Pods PCB?
It measures 50 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pods use?
32 parts, built around the STM32F103RCT6, NRF24L01P-R, ADP1710AUJZ-R7 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pods KiCad files?
From the desertkun/pods repository on GitHub, at the commit this page was made from: the board is layout/pods.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pods design in my own project?
Its repository states no licence, so its author keeps all rights: ask desertkun before reusing the design.