
Macrolev
heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches

This repository contains the KiCAD project files for my Arduino/Raspberry Pi controlled typewriter project
Typewriter keyboard is an open-source printed circuit board by artillect, from the artillect/AX-25-mechanical-keyboard repository on GitHub. It is a 2-layer board of 359.4 × 123.2 mm with 91 parts on 107 nets, routed with 1,472 tracks and 31 vias.
It is built around the CD74HC4067SM96. Its parts include 70 switches, 5 resistors, 5 ICs, 4 capacitors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
This repository contains the KiCAD project files for my Arduino/Raspberry Pi controlled typewriter project

| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | SW_Push | MX_Alps_Hybrid:MX-1U-NoLED | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW17, SW18, SW19, SW21, SW22, SW23, SW24, SW25 +42 |
| 5 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 4 | 100u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C4 |
| 4 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U1, U2, U3, U4 |
| 4 | SW_Push | MX_Alps_Hybrid:MX-1.25U-NoLED | SW66, SW67, SW69, SW70 |
| 2 | Conn_01x01_Male | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm | +5V1, GND1 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-2.25U-NoLED | SW49, SW53 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-1.5U-NoLED | SW20, SW33 |
| 1 | Arduino_Nano | Arduino:Arduino_Nano | U5 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x11_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J1 |
| 1 | LOGO | Arduino:artillect_logo | G*** |
| 1 | LOGO | Arduino:shibui | G*** |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J3 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-6.25U-NoLED | SW68 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-1.75U-NoLED | SW37 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2.75U-NoLED | SW64 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2U-NoLED | SW16 |

heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches




Bad-Dog-Designs/ESP32-S3-Synthesizer
Source code and KiCad Files for the build of an ESP32 S3 Based synthesizer. CAN bus is used extensively to collect all the pots and switch data and send to the ESP32 engine

FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…

vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA

Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
It measures 359.4 × 123.2 mm and has 2 copper layers, 1.6 mm thick.
91 parts, built around the CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the artillect/AX-25-mechanical-keyboard repository on GitHub, at the commit this page was made from: the board is typewriter keyboard.kicad_pcb and its schematic typewriter keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask artillect before reusing the design.