4 layers45 × 32 mm
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT
2 layers87 × 66 mm
E ink macropad
ArthusPVP/e-ink-macropad- Size
- 87 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 69
- Pads
- 338
- Tracks, vias
- 749, 304
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Jun 2026
- Updated
- 8 Jun 2026
Overview
E ink macropad is an open-source printed circuit board by ArthusPVP, from the ArthusPVP/e-ink-macropad repository on GitHub. It is a 2-layer board of 87 × 66 mm with 77 parts on 69 nets, routed with 749 tracks and 304 vias.
It is built around the MBR0530 and SI1308EDL. Its parts include 36 capacitors, 12 diodes, 11 resistors, 5 ICs and 5 switches. It belongs with the keyboards and input and lEDs and displays boards of this library.
Main components
2
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
SI1308EDL
SC-70-3-55℃~+150℃ 1 N-channel 1.4nC@10V 1.5A 1.5V 105pF 11pF 132mΩ@10V 23pF 30V 400mW N-Channel SOT-323 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1uF/25V | Capacitor_SMD:C_01005_0402Metric | C1, C10, C11, C14, C15, C16, C19, C20, C21, C24, C27, C28, C31, C32, C35, C36 +4 |
| 12 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 8 | 1uF/25v | Capacitor_SMD:C_01005_0402Metric | C2, C3, C7, C8, C12, C13, C17, C18 |
| 8 | 4.7uF/25V | Capacitor_SMD:C_01005_0402Metric | C22, C23, C25, C26, C29, C30, C33, C34 |
| 4 | 1M | Resistor_SMD:R_0402_1005Metric | R1, R3, R5, R7 |
| 4 | 2.2Ω | Resistor_SMD:R_0402_1005Metric | R2, R4, R6, R8 |
| 4 | 47uH 500mA | Inductor_SMD:L_1206_3216Metric | L1, L2, L3, L4 |
| 4 | E-INK | Library:Amphenol_F32Q-1A7x1-11018_1x18-1MP_P0.5mm_Horizontal | U1, U2, U3, U4 |
| 4 | SW_Cherry | Library:SW__CHERRY | SW1, SW2, SW3, SW4 |
| 4 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q2, Q3, Q4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R9, R14, R15 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW5 |
| 1 | ~ | Library:MODULE_ESP32-C3_SUPERMINI | U5 |
Questions
How big is the E ink macropad PCB?
It measures 87 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E ink macropad use?
77 parts, built around the MBR0530 and SI1308EDL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E ink macropad KiCad files?
From the ArthusPVP/e-ink-macropad repository on GitHub, at the commit this page was made from: the board is PCB/e-ink_macropad/e-ink_macropad.kicad_pcb and its schematic PCB/e-ink_macropad/e-ink_macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E ink macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArthusPVP before reusing the design.
Similar boards
- 2 layers83.2 × 40 mm
- 2 layers45 × 45 mm
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130 - 2 layers35 × 45 mm
Aether
EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration
57 parts129 - 2 layers69.4 × 113 mm
- 4 layers36.5 × 69 mm
Storm tracker
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package
102 parts58 - 4 layers70.2 × 71 mm
C3-27-epaper touch
martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)
64 parts32Apache-2.0 - 4 layers50 × 50 mm
Insulin Pump PCB Schematic
UCBioengineering/open_source_insulin_pump
This repository contains software and hardware files for building an open source insulin pump. Files were created by the team at UC Bioengineering, University of Canterbury, Christchurch, New Zealand.
143 parts27