6 layers57 × 25.9 mm
R7FS7MOD
Brazil-L/Lumeward-OpenSource
Open-source Lumeward firmware and development tools
228 parts2Apache-2.0
4 layers50 × 50 mm
Insulin Pump PCB Schematic
UCBioengineering/open_source_insulin_pump27This repository contains software and hardware files for building an open source insulin pump. Files were created by the team at UC Bioengineering, University of Canterbury, Christchurch, New Zealand.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 143
- Nets
- 121
- Pads
- 423
- Tracks, vias
- 548, 81
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2021
- Updated
- 18 Apr 2023
Overview
Insulin Pump PCB Schematic is an open-source printed circuit board by UCBioengineering, from the UCBioengineering/open_source_insulin_pump repository on GitHub. It is a 4-layer board of 50 × 50 mm with 143 parts on 121 nets, routed with 548 tracks and 81 vias.
It is built around the ADP1612ARMZ-R7, IS25LP128F-JBLE and AB1815-T3, with the DS2710G+, MBR0530 and SI1308EDL among its other parts. Its parts include 48 resistors, 36 capacitors, 13 diodes, 8 ICs and 4 connectors. It belongs with the SAM D and SAM boards of this library.
Main components
6
ADP1612ARMZ-R7
MSOP-8-40℃~+125℃@(TJ) 1 1.35mA 1.4A 1.8V~20V 1.8V~5.5V 650kHz、1.3MHz Adjustable Boost Boost Built-in No MSOP-8 DC-DC Converters ROHSAnalog DevicesDC-DC Converters
IS25LP128F-JBLE
SOIC-8-208mil-40℃~+105℃ 100,000 cycles 128Mbit 166MHz 2.3V~3.6V 20 Years 200us 8uA Power-on reset、Hardware write protection、Software write protection、Write enable latch、Power lock protection SPI SOIC-8-208mil NOR FLASH ROHSISSINOR FLASH
AB1815-T3
QFN-16(3x3)-40℃~+85℃ 1.7V~3.6V 14nA 14nA Built-in SPI Watchdog timer、Backup power management and battery charging、Battery low-voltage detection、InsideSRAM/NVRAM、Programmable clock output、Alarm function、Sleep/Wake control、Countdown timer Yes QFN-16(3x3) Real Time Clocks ROHSAbraconReal Time Clocks
DS2710G+
TDFN-10(3x4)1 TDFN-10(3x4) Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
SI1308EDL
SC-70-3-55℃~+150℃ 1 N-channel 1.4nC@10V 1.5A 1.5V 105pF 11pF 132mΩ@10V 23pF 30V 400mW N-Channel SOT-323 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R17, R20, R21, R22, R23, R26, R31, R42, R43, R44, R45, R47 +4 |
| 10 | 1uF/50V | Capacitor_SMD:C_0603_1608Metric | C25, C26, C27, C28, C29, C30, C31, C32, C33, C36 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C8, C9, C12, C15, C22, C23, C24 |
| 6 | LED | Diode_SMD:D_0603_1608Metric | D3, D6, D10, D11, D12, D13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C10 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R27, R34, R41 |
| 4 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2, D4, D5 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1, SW2, SW3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R18, R25 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R14, R37 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C21 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_0603_1608Metric | C34, C35 |
| 2 | 500m | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 70mF | Footprint Library:CAP_DSK-3R3H703T414-HLL | C11, C19 |
| 2 | MBR0530 | Diode_SMD:D_SOD-123 | D7, D9 |
| 2 | Q_PMOS_DGS G1S2G2D2S1D1 | Footprint Library:SOT95P230X110-3N | Q1, Q2 |
| 1 | 0.1R | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R46 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 10K THERMISTOR | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 120pF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 150R | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 15R | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 270K | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 30K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 33nF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 3K9 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 3V | Footprint Library:TP+195X110 | TP10 |
| 1 | 3V0 | Footprint Library:TP+195X110 | TP18 |
| 1 | 3V3 MCU | Footprint Library:TP+195X110 | TP20 |
| 1 | 4.7uH | Inductor_SMD:L_Wuerth_WE-TPC-3816 | L2 |
| 1 | 470K | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 51K | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 5R1 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 6K8 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 80K | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | AB1815 | Footprint Library:QFN50P300X300X90-17N | U5 |
| 1 | ADC_BATT | Footprint Library:TP+195X110 | TP5 |
| 1 | ADP1612ARMZ-R7 | Footprint Library:SOIC-08 | U3 |
| 1 | ATSAMD21G18A-AUT | Footprint Library:QFP50P900X900X120-48N | U1 |
| 1 | BATT+ | Footprint Library:TP+195X110 | TP19 |
| 1 | BOOST_EN | Footprint Library:TP+195X110 | TP9 |
| 1 | BOOST_OUT | Footprint Library:TP+195X110 | TP11 |
| 1 | Battery Connector | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x05 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J1 |
| 1 | DIR | Footprint Library:TP+195X110 | TP8 |
| 1 | DRV8846RGER | Footprint Library:QFN50P400X400X100-25N | U2 |
| 1 | DS2710G+ | Footprint Library:SON50P300X400X80-11N | U7 |
| 1 | Ferrite_Bead - 220 Ohm @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | GND | Footprint Library:TP+195X110 | TP3 |
| 1 | IS25LP128F-JBLE | Footprint Library:SOIC127P790X216-8N | IC1 |
| 1 | LTC4412ES6TRMPBF | Footprint Library:SOT95P280X100-6N | U6 |
| 1 | MBRO530 | Diode_SMD:D_SOD-123 | D8 |
| 1 | MISO | Footprint Library:TP+195X110 | TP15 |
| 1 | MOSI | Footprint Library:TP+195X110 | TP12 |
| 1 | Murata 1239AS-H-100M=P2 10uH 1A | Inductor_SMD:L_1008_2520Metric | L4 |
| 1 | Reset | Footprint Library:TP+195X110 | TP4 |
| 1 | SCLK | Footprint Library:TP+195X110 | TP14 |
| 1 | SI1308EDL | Footprint Library:SOT65P210X110-3N | Q3 |
| 1 | SISCDRH74M-150R (Or equivalent) - 15uH | Inductor_SMD:L_Wuerth_MAPI-3020 | L3 |
| 1 | SMD2012 (2.0mm *1.2mm) LFXTAL050789 | Resistor_SMD:R_0805_2012Metric | Y1 |
| 1 | SS_RTC | Footprint Library:TP+195X110 | TP13 |
| 1 | STEP | Footprint Library:TP+195X110 | TP7 |
| 1 | SWDCLK | Footprint Library:TP+195X110 | TP2 |
| 1 | SWDIO | Footprint Library:TP+195X110 | TP1 |
| 1 | Sumida CDRH4D28CNP-4R7PC 4.7uH | Inductor_SMD:L_Wuerth_WE-TPC-3816 | L1 |
| 1 | TPS613221ADBVT | Footprint Library:SOT95P280X145-5N | U4 |
| 1 | USB_5V | Footprint Library:TP+195X110 | TP16 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | USB_DETECT | Footprint Library:TP+195X110 | TP17 |
The 140 most common of 143 parts.
Questions
How big is the Insulin Pump PCB Schematic PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Insulin Pump PCB Schematic use?
143 parts, built around the ADP1612ARMZ-R7, IS25LP128F-JBLE, AB1815-T3 and DS2710G+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Insulin Pump PCB Schematic KiCad files?
From the UCBioengineering/open_source_insulin_pump repository on GitHub, at the commit this page was made from: the board is PCB Files/Insulin Pump PCB Schematic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Insulin Pump PCB Schematic design in my own project?
Its repository states no licence, so its author keeps all rights: ask UCBioengineering before reusing the design.
Similar boards
- 4 layers94 × 50.8 mm
- 4 layers95 × 80 mm
Kilsyth
kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.
170 parts110BSD - 4 layers82.8 × 56.7 mm
State Mode Logic Analyzer
baldengineer/State-Mode-Logic-Analyzer
RP2040-Based Logic Analyzer that captures "state" mode
134 parts8MIT - 6 layers113 × 99 mm
- 4 layers97.6 × 74.8 mm
Project byte hamr
robertrico/project_byte_hamr
Open source expansion platform for Apple IIe prototyping and development
93 parts2 - 4 layers55.1 × 40 mm
- 8 layers60.1 × 32.1 mm
