Skip to the content
2 layersSampling design, the printed circuit board in 3D

Sampling design

arthurisanararia/ENOSE

Capstone

Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
46
Pads
52
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
12 Jun 2026
Updated
6 Oct 2026

Overview

Sampling design is an open-source printed circuit board by arthurisanararia, from the arthurisanararia/ENOSE repository on GitHub. It is a 2-layer board with 2 parts on 46 nets.

It is built around the ESP32-S3-DEVKITC-1-N8R2 and AD708AQ. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

ENOSE

Capstone

Parts

2
QtyValueFootprintReferences
1AD708AQAD708AQ:Q_8_ADIU2
1ESP32-S3-DEVKITC-1-N8R2XCVR_ESP32-S3-DEVKITC-1-N8R2.petty:XCVR_ESP32-S3-DEVKITC-1-N8R2U3

Similar boards

  • 4 layers135 × 84 mmStepper with TMC2209 controller board V1, the printed circuit board in 3D

    Stepper with TMC2209 controller board V1

    JasonHEngineering/DIY-Robot-Arm-V3

    1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.

    95 parts2
  • 2 layers200 × 130 mmEsp32s3 wmlta, the printed circuit board in 3D

    Esp32s3 wmlta

    riezky-gitH/SIMPAS-BOILER

    > 📖 Guidebook proyek — tautan guidebook baru akan ditambahkan di sini.

    129 parts2MIT
  • 2 layers100 × 50 mmVga test, the printed circuit board in 3D

    Vga test

    cfrankb/ESP32-S3-VGA-ADAPTOR

    VGA ESP32-S3 Breakout board for WROOM1- DevKit

    38 parts1
  • 4 layers100 × 79 mmESP32 Interface, the printed circuit board in 3D

    ESP32 Interface

    dennowiggle/ESP32_Interface

    Facilitate learning the Z80 Retro! hardware and software.

    114 parts1LGPL-2.1
  • 2 layers85.4 × 100 mmMl robot, the printed circuit board in 3D

    Ml robot

    matthieu-sgi/machine_learning_robot

    A machine learning bot.

    16 parts1
  • 2 layers126.2 × 143.6 mmSciencepcb, the printed circuit board in 3D

    Sciencepcb

    Sidbit08/ABEX_PCB_v1

    A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.

    100 parts1
  • 2 layers102 × 45 mmHELPStat V2, the printed circuit board in 3D

    HELPStat V2

    stevfu/eis_capstone

    Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs

    51 parts1MIT

Questions

What parts does the Sampling design use?

2 parts, built around the ESP32-S3-DEVKITC-1-N8R2 and AD708AQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sampling design KiCad files?

From the arthurisanararia/ENOSE repository on GitHub, at the commit this page was made from: the board is sampling design/sampling_design/sampling_design.kicad_pcb and its schematic chamber_control/chamber_control_pcb/chamber_control_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sampling design design in my own project?

Its repository states no licence, so its author keeps all rights: ask arthurisanararia before reusing the design.