Arre-Jay/BlueWavePCB3Untested bluetooth and IMU board with USB input
Blue Pedal is an open-source printed circuit board by Arre-Jay, from the Arre-Jay/BlueWavePCB repository on GitHub. It is a 4-layer board of 58 × 38 mm with 80 parts on 71 nets, routed with 414 tracks and 131 vias.
It is built around the STM32WB55CGU6, DLF162500LT-5028A1 and MIC5205-3.3YM5, with the USBLC6-2SC6, C1005X7R1E104KT000F and C1608X5R1V475KT000E among its other parts. Its parts include 27 capacitors, 14 resistors, 5 inductors, 4 ICs and 4 connectors. It belongs with the audio and music boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C7, C8, C10, C18, C21, C22, C23, C25, C26, C27 |
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP5, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R11, R12, R14 |
| 6 | 4u7F | Capacitor_SMD:C_0603_1608Metric | C1, C9, C13, C14, C17, C24 |
| 5 | 5K11 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R9, R10, R13 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | MHT192CRCT | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L3, L5 |
| 2 | 8pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | SW_MEC_5E | MyLibrary:SMG-H9 | SW1, SW2 |
| 1 | 0p3F | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 0p8F | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 1.8nH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 2450AT43B100E | MyLibrary:2450AT43B100E | AE1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | Conn_02x10_Odd_Even | MyLibrary:EDGE_HEADER_20_WAY | J2 |
| 1 | External Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | IO HEADER | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | LIS2DH12TR | Package_LGA:LGA-12_2x2mm_P0.5mm | U3 |
| 1 | MIC5205-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | STM32WB55CGUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ~ | MyLibrary:DLF162500LT-5028A1 | FLT1 |
It measures 58 × 38 mm and has 4 copper layers, 1.6 mm thick.
80 parts, built around the STM32WB55CGU6, DLF162500LT-5028A1, MIC5205-3.3YM5 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arre-Jay/BlueWavePCB repository on GitHub, at the commit this page was made from: the board is Blue_Pedal.kicad_pcb and its schematic Blue_Pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arre-Jay before reusing the design.
justinfederico/STM32testPCB
Custom STM32WB microcontroller to practice my PCB schematic and layout skills. Looking to get it printed soon! Bear in mind that this is an ameuter project, so there will probably be errors aplenty.
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
dibreyjonatan/SAFE-ROOM
SAFE ROOM est une dispositif électronique qui permet de connaitre en temps réel, les conditions d'une pièce. A savoir la qualité d'air, la temperature, l'humidité, et la pression.
PanBabinicz/ghost-feather
Here: - -n myenv specifies the environment name - python=3.10 installs a specific Python version
davispe1/wearable-imu
Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).
NasserTaqi/STM32WB_Bluetooth_PCB
This project is a PCB built around an STM32WB for RF Bluetooth connection.