

Choc
An open source, split, wireless, smd, 42 key, keyboard family
- Size
- 127.9 × 89.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 28
- Pads
- 370
- Tracks, vias
- 367, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 May 2022
- Updated
- 30 Jan 2023
Overview
Choc is an open-source printed circuit board by ARognes, from the ARognes/Gravi repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 127.9 × 89.4 mm with 71 parts on 28 nets, routed with 367 tracks and 12 vias.
It is built around the BQ24075RGT. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdGravi
This is a 42 or 36 key, bluetooth keyboard with at least 100mAh battery life per side
Idk exactly what to call this keyboard. The main focus of it is to eliminate the extra area where the system on a chip (SoC) is commonly located. However I've gotten carried away and removed much more.
A minimal amount of tenting will be required to hold the battery underneath.
Names:
- Estoc
- Crawlerboard
- Gravby
- Gravbi
- Gravi
- Gravi
- Mash
- Contour Split
- Ergo Berry
- Skeleberry
- DexBerry
Features:
- Split in 2 halves
- Bluetooth low energy
- nRF52 family
- On-board SMD components
- No center microcontroller area
- Minimal visible space without keys
- Battery underneath tenting towards usb-c edge
- Milmax sockets
There may be 2 sizes for standard and low profile switch types
- Cherry MX / Kailh
- Kailh choc
The main focus is the Kailh choc board (low profile).
Rohs and FCC compliance will be a hurdle. A case will need to be built, by this time aesthetics will be more of a concern.
Schematic

Prototypes

Revision 4
(Looks the same as rev 3)
Revision 3

Revision 2
(Looks the same as rev 3)
Revision 1

Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | PG1350 | S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1, S1 +26 | |
| 5 | R_0201_0603Metric | Resistor_SMD:R_0201_0603Metric | RES, RES, RES, RES, RES |
| 4 | TestPoint_Plated_Hole_D2.0mm | TestPoint:TestPoint_Plated_Hole_D2.0mm | GND, SWDCLK, SWDIO, VBAT |
| 3 | C_0201_0603Metric | Capacitor_SMD:C_0201_0603Metric | CAP, CAP, CAP |
| 2 | , | ||
| 2 | MountingHole_3.2mm_M3_Pad_Via | MountingHole:MountingHole_3.2mm_M3_Pad_Via | 0, 0 |
| 1 | clipboard:8583f098-8525-47d3-99c4-a63cf4c513a4 | ||
| 1 | BQ24075 | BQ24075TRGTT:QFN50P300X300X100-17N | BQ24075 |
| 1 | LED_0603_1608Metric | LED_SMD:LED_0603_1608Metric | LED |
| 1 | LOGO | Desktop:Untitled | CENTIPEDE |
| 1 | LOGO | LOGO | G*** |
| 1 | MOLEX_2169900003 | 2169900003:MOLEX_2169900003 | USB-C |
| 1 | MS88SF3_Min | 0_ARognes:MS88SF3_Min | nRF52833 |
| 1 | SW_PTS526_SM08_SMTR2_LFS | PTS526_SM08_SMTR2_LFS:SW_PTS526_SM08_SMTR2_LFS | RESET |
The 66 most common of 71 parts.
More from ARognes/Gravi
1- 2 layers174.5 × 126.3 mm

Similar boards
- 4 layers120 × 75 mm

Portapack h1
portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M
111 parts5.5kGPL-3.0 - 4 layers45 × 32 mm

Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT - 2 layers225.5 × 185.2 mm

Levels
Good-Great-Grand-Wonderful/levels54
Levels54 is for people who care about how things are made and how they feel. Every component—from ceramic trackball bearings to stainless switch plates—is chosen to deliver smooth, precise, durable performance.
243 parts67MIT - 2 layers131.5 × 184.4 mm

- 4 layers93.5 × 72.3 mm

- 4 layers55 × 97 mm

Melodio SelfMate V2
zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.
121 parts53 - 2 layers271.8 × 103.9 mm

- 2 layers188.9 × 80.8 mm

Pandemonium BLE e7 cutout
calvin-mcd/pandemonium
30% alpha staggered keyboard with big ISO enter and bluetooth support
137 parts26GPL-3.0
Questions
How big is the Choc PCB?
It measures 127.9 × 89.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Choc use?
71 parts, built around the BQ24075RGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Choc KiCad files?
From the ARognes/Gravi repository on GitHub, at the commit this page was made from: the board is V0.1/Choc/main.kicad_pcb and its schematic V0.1/Choc/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Choc design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).