
MasterAlimCAN
ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

Repository des différentes réalisations électroniques
ModuleMesure is an open-source printed circuit board by ARIG-Robotique, from the ARIG-Robotique/kicad-projects repository on GitHub. It is a 4-layer board of 83.5 × 54.8 mm with 73 parts on 80 nets, routed with 312 tracks and 57 vias.
It is built around the AMS1117-3.3 and BSS138. Its parts include 22 resistors, 18 capacitors, 12 connectors, 6 ICs and 3 switches. It belongs with the STM32 boards of this library.
Module de contrôle I2C des alimentations et AU logique.

Module d'alimentation régulée 3A.

Module d'alimentation régulée 6A.

Module I2C de mesure tension/courant, 4 mesures.
Module I2C de mesure tension/courant, 2 mesures.

Module de lecture de 8 capteurs tout ou rien sur I2C.

Controle I2C de 4 pompes à vide + electrovannes + presiostats.

Shield Raspberry Pi pour connecter les modules.

Module de multiplexage I2C pour 8 capteurs de couleur.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C9, C10, C12, C13, C14, C15, C18 |
| 11 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16, R18, R19, R22 |
| 4 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R8 |
| 4 | 5.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7 |
| 4 | ACS711xEXLT-15AB | Sensor_Current:Allegro_QFN-12-10-1EP_3x3mm_P0.5mm | U1, U2, U3, U4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | LOGO | ARIG:Logo_ARIG_12_6x6_6 | G***, G*** |
| 1 | 100u | Capacitor_SMD:CP_Elec_5x5.4 | C5 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 18 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 330u | Capacitor_SMD:CP_Elec_6.3x7.7 | C6 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | ARIG Interf | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J12 |
| 1 | Boot0 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | Boot1 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW3 |
| 1 | I2C SCL | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | I2C SDA | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J10 |
| 1 | In Mes 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | In Mes 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | In Mes 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | In Mes 4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | Out Mes 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J3 |
| 1 | Out Mes 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | Out Mes 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5 |
| 1 | Out Mes 4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J6 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J11 |

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques




akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.




apuder/PocketTRS
PocketTRS uses a modern microcontroller to emulate a TRS-80 personal computer. It can be connected to any compatible VGA monitor and PS/2 keyboard. PocketTRS has TRS-IO embedded for full FreHD support.

It measures 83.5 × 54.8 mm and has 4 copper layers, 1.6 mm thick.
73 parts, built around the AMS1117-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ARIG-Robotique/kicad-projects repository on GitHub, at the commit this page was made from: the board is Alimentation/ModuleMesure/ModuleMesure.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ARIG-Robotique before reusing the design.