
ControlleursAsserv
ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

Repository des différentes réalisations électroniques
MasterAlimCAN is an open-source printed circuit board by ARIG-Robotique, from the ARIG-Robotique/kicad-projects repository on GitHub. It is a 4-layer board of 85 × 98.5 mm with 122 parts on 107 nets, routed with 640 tracks and 85 vias.
It is built around the LM358, 74LVC1G02Z and AMS1117-3.3, with the BSS138 among its other parts. Its parts include 42 resistors, 30 capacitors, 14 connectors, 11 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Module de contrôle I2C des alimentations et AU logique.

Module d'alimentation régulée 3A.

Module d'alimentation régulée 6A.

Module I2C de mesure tension/courant, 4 mesures.
Module I2C de mesure tension/courant, 2 mesures.

Module de lecture de 8 capteurs tout ou rien sur I2C.

Controle I2C de 4 pompes à vide + electrovannes + presiostats.

Shield Raspberry Pi pour connecter les modules.

Module de multiplexage I2C pour 8 capteurs de couleur.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R10, R11, R13, R16, R18, R21, R24, R26, R27, R30, R31, R32, R33 +1 |
| 15 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C8, C9, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C29, C30 |
| 8 | 7.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R25, R28, R29, R34, R35, R36, R37 |
| 7 | 68 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R8, R9, R14, R15, R38 |
| 5 | Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39, R40, R41, R42 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C24, C28 |
| 2 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R23 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C10 |
| 2 | 1M | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1, RV2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C25 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22, C26 |
| 2 | 330u | Capacitor_SMD:CP_Elec_8x10 | C23, C27 |
| 2 | 47 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R12 |
| 2 | 5.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R22 |
| 2 | 6A | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1, F2 |
| 2 | 74LVC1G02 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U4 |
| 2 | ACS711xEXLT-15AB | Sensor_Current:Allegro_QFN-12-10-1EP_3x3mm_P0.5mm | U7, U8 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U6, U11 |
| 2 | PTN78020W_EUK-7 | ARIG:Texas_EUK_R-PDSS-T7_THT | U9, U10 |
| 2 | Red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7 |
| 1 | 100u | Capacitor_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 330u | Capacitor_SMD:CP_Elec_6.3x7.7 | C3 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | ADD1 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | ADD2 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Alim 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J11 |
| 1 | Alim 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J13 |
| 1 | Alim Log | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J10 |
| 1 | BATT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | BOOT0 | ARIG:SW_TS_1088_AR_3x4x2 | SW2 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_CUI_CST-931RP-A | BZ1 |
| 1 | CAN1 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J6 |
| 1 | CAN2 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J7 |
| 1 | Conn AU | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J8 |
| 1 | DEBUG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | EN 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | EN 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J12 |
| 1 | I2C1_5 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4 |
| 1 | I2C2_5 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J5 |
| 1 | In App Prog | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | LOGO | ARIG:Logo_ARIG_12_6x6_6 | G*** |
| 1 | Lipo Cells | Connector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J15 |
| 1 | MCP2558FD-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | RESET | ARIG:SW_TS_1088_AR_3x4x2 | SW1 |
| 1 | STM32G474RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques

ARIG-Robotique/kicad-projects
Repository des différentes réalisations électroniques


OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release


sbyd-space/vape-light
An educational DIY kit for converting a disposable vape into a rechargeable flashlight

ApplePie420/OpenJBOD-CM4
This project is heavily inspired by the work of TheGuyDanish, specifically his OpenJBOD thingamajig.
SL-RU/svelotracker
Device for bicycle. It will show current position, track, speed, compass, direction to the destination or to start. It can save the track and etc

It measures 85 × 98.5 mm and has 4 copper layers, 0.19 mm thick.
122 parts, built around the LM358, 74LVC1G02Z, AMS1117-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ARIG-Robotique/kicad-projects repository on GitHub, at the commit this page was made from: the board is Alimentation/MasterAlimCAN/MasterAlimCAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ARIG-Robotique before reusing the design.