
Netscore
arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.
Netscore is an open-source printed circuit board by arcticlula, from the arcticlula/Netscore repository on GitHub, published under the MIT licence. It is a 4-layer board of 102 × 34 mm with 115 parts on 87 nets, routed with 1,150 tracks and 158 vias.
It is built around the ESP32-S3-WROOM-1-N8, DRV8833PWP and 74LVC1G3157, with the AP2112K-3.3, AO3401A and BAT20J among its other parts. Its parts include 30 resistors, 21 capacitors, 8 diodes, 7 transistors and 3 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Device that keeps track of a volleyball's game score (points and sets).
Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | TestPoint_Alt | TestPoint:TestPoint_Pad_D1.5mm | 3v3, 5V, B-, B+, G, GND, GND, GND, GND, GND, GND, LDO, LDO, TX, VCC, VCC |
| 8 | MountingHole | MountingHole:MountingHole_2mm | H1, H2, H3, H4, H5, H6, H7, H8 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R17, R18, R19, R20, R24, R25 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9, C11, C14, C18, C21 |
| 5 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q5, Q6, Q7 |
| 4 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R14, R21, R22 |
| 4 | BAT20J | Diode_SMD:D_SOD-323_HandSoldering | D2, D6, D7, D8 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3, D4, D5 |
| 4 | LOGO | Luis:lula1 | G***, G***, G***, G*** |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7, R8 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R13 |
| 3 | 10uF | Capacitor_SMD:CP_Elec_4x5.3 | C15, C17, C20 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C10 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BAT, BUZZER A, BUZZER B |
| 3 | SW_Push | Luis:Button_3x4x2.5 | BOOT, RST, RTC_RST |
| 2 | 100k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R28, R29 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C19 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C16 |
| 2 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 74LVC1G3157 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2, U3 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x12_P1.27mm_Vertical | A, B |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 1 | 499 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R6 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | CELL |
| 1 | DRV8833PWP | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | DRV |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | RTC |
| 1 | ESP32-S3-WROOM-1 | Luis:ESP32-S3-WROOM-1U | ESP32 |
| 1 | FS312MH | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | BMS |
| 1 | LOGO | Luis:rake | G*** |
| 1 | LOGO | Luis:fishing | G*** |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | SW_Push | Luis:Kahil Mute 6.2x6.2x7.3 | PWR |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | TP |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

Qeteshpony/Badge-Scanner
Raspberry Pi Pico W powered device to scan NFC-Badges and show a status on display

oiver12/VariometerV2
Paragliding variometer: custom KiCad PCBs, ESP32 firmware, sensor fusion, e-ink UI, and desktop flight replay.

neilgibsonpinto-art/litewing-65-flight-controller
An ultra-low SWaP-C (Size, Weight, Power, and Cost) monolithic flight computer and decentralized micro-UAV swarm reconnaissance architecture engineered by Neil Gibson Pinto at Sahyadri College of Engineering &…

LCQIANN/esp32s3-camera
ESP32-S3 camera board v1.2: OV2640 DVP camera, microSD, USB-C, LiPo, KiCad 10 project for JLCPCB PCBA


etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…
It measures 102 × 34 mm and has 4 copper layers, 1.6 mm thick.
115 parts, built around the ESP32-S3-WROOM-1-N8, DRV8833PWP, 74LVC1G3157 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the arcticlula/Netscore repository on GitHub, at the commit this page was made from: the board is hardware/pcb/v2.0/main-board/main-board.kicad_pcb and its schematic hardware/pcb/v1.0/display-board/display-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).