2 layers22 × 25 mm
2 layers22 × 25 mm
PMW3360
arbope/trackball_pcb1schematic & pcb for the PMW3360 module, kicad 10.0.4
- Size
- 22 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 25
- Pads
- 81
- Tracks, vias
- 1,894, 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Sep 2026
- Updated
- 16 Sep 2026
Overview
PMW3360 is an open-source printed circuit board by arbope, from the arbope/trackball_pcb repository on GitHub. It is a 2-layer board of 22 × 25 mm with 24 parts on 25 nets, routed with 1,894 tracks and 18 vias.
It is built around the TXS0102DCU and TPS73601DBV. Its parts include 11 resistors, 7 capacitors, 4 ICs and 2 connectors.
Main components
2
TXS0102DCU
TSSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorised
TPS73601DBV
SOT-23-5-40℃~+125℃@(Tj) 1 1.2V~5.5V 200mV@(400mA) 5.5V 500mA 58dB@(100Hz) Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.md
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R3, R5 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R7, R11 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C7 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | TXS0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U3, U4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 1M_DNI | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 37.4k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 39 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 63.4k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | Conn_01x01 | Connector_Pin:Pin_D1.0mm_L10.0mm | J2 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | PMW3360 | PMW3360:PMW3360 | U1 |
| 1 | TPS73601DBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
More from arbope/trackball_pcb
1Similar boards
- 2 layers133.2 × 75.4 mm
- 2 layers342.9 × 109.6 mm
- 2 layers30 × 30.2 mm
Paw3395 breakout board
vnguyen31/PixArt-PAW3395-Breakout-Board
Fully functioning Breakout Board with SPI pin headers for PAW3395 Motion Sensor
28 parts11MIT - 2 layers50 × 22.9 mm
RX Module nRF24L01
obbo-pl/RC-RX-NRF24L01
RC receiver with NRF24L01 module and compatible with the CABELL protocol
33 parts3GPL-3.0 - 2 layers336.8 × 109.9 mm
- 2 layers110 × 94 mm
- 2 layers22.8 × 24 mm
- 6 layers190 × 140 mm
Questions
How big is the PMW3360 PCB?
It measures 22 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PMW3360 use?
24 parts, built around the TXS0102DCU and TPS73601DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PMW3360 KiCad files?
From the arbope/trackball_pcb repository on GitHub, at the commit this page was made from: the board is PMW3360.kicad_pcb and its schematic .kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PMW3360 design in my own project?
Its repository states no licence, so its author keeps all rights: ask arbope before reusing the design.