TPS73601DBV

Q: Is there a KiCad symbol and footprint for the TPS73601DBV?

Yes. The symbol is Regulator_Linear:TPS73601DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

Q: What package is the TPS73601DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Q: Where is the TPS73601DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Q: Where can I order the TPS73601DBV?

JLCPCB lists it as part C59200, with 27,063 in stock; the sellers' links on this page open their listings.

Q: What can replace the TPS73601DBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the AP2112K-1.8TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Q: Which open-source boards use the TPS73601DBV?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V~5.5V 200mV@(400mA) 5.5V 500mA 58dB@(100Hz) Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Datasheet

Part id: ti/TPS73601DBV
Category: Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package: SOT-23-5
Pins: 5
In stock: 27,063 at JLCPCB (C59200)
Used on: 9 open-source boards

Overview

The TPS73601DBV is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.2V~5.5V 200mV@(400mA) 5.5V 500mA 58dB@(100Hz) Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS73601DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 27,063 are in stock at JLCPCB (part C59200). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

Regulator_Linear:TPS73601DBVFrom KiCad's library

Footprint

Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

Supply, least: 1.7 V · VIN, recommended operating min · p. 4
Supply, most: 5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum: 6 V · VIN, absolute max · p. 4
Junction, hottest: 150 °C · Operating junction, absolute max · p. 4
Gives: 400 mA · Continuous output current max · p. 4
Feedback reference: 1.204 V · VFB, typical at TJ = 25°C · p. 6
Dropout: 75 mV · Typical at IOUT = 400mA · p. 6
Current limit: 650 mA · Typical at VOUT = 0.9 × VOUT(nom) · p. 6
Takes working: 400 µA · IGND, typical at IOUT = 10mA, legacy silicon · p. 6
Takes asleep: 20 nA · Shutdown typical, new silicon · p. 6
Junction to air (DBV (SOT-23)): 185.2 K/W · New silicon thermal resistance · p. 4
Junction to case (DBV (SOT-23)): 82.9 K/W · New silicon, junction to case top · p. 4
Junction to board (DBV (SOT-23)): 53.1 K/W · New silicon thermal resistance · p. 4
Junction to air (DBV (SOT-23)): 221.9 K/W · Legacy silicon thermal resistance · p. 5
Junction to case (DBV (SOT-23)): 74.9 K/W · Legacy silicon, junction to case top · p. 5
Junction to board (DBV (SOT-23)): 51.9 K/W · Legacy silicon thermal resistance · p. 5

What it is and has

Topology: NMOS, capacitor-free LDO with reverse current protection · p. 1
Initial accuracy: 0.5% · p. 1
Adjustable output: 1.20V to 5.5V · p. 1
Package: DBV (SOT-23, 5), 2.9mm × 2.8mm · p. 1

Specifications

Parameter	Conditions	As printed	Page
Input VIN	Over operating junction temperature range	min -0.3 · max 6 V	4
Enable VEN	Over operating junction temperature range	min -0.3 · max 6 V	4
Output VOUT	Over operating junction temperature range	min -0.3 · max 5.5 V	4
Voltage VFB	Adjustable version; over operating junction temperature range	min -0.3 · max 6 V	4
Operating junction TJ		min -55 · max 150 °C	4
Storage Tstg		min -65 · max 150 °C	4
Electrostatic discharge V(ESD)	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 V	min -2000 · max 2000 V	4
Electrostatic discharge V(ESD)	Charged-device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 V	min -500 · max 500 V	4
Input supply voltage VIN	Over operating junction temperature range	min 1.7 · max 5.5 V	4
Output current IOUT	Over operating junction temperature range	min 0 · max 400 mA	4
Operating junction temperature TJ		min -40 · max 125 °C	4
Junction-to-ambient thermal resistance RθJA	TPS736 New silicon, DBV (SOT-23), 5 PINS	typ 185.2 °C/W	4
Junction-to-case (top) thermal resistance RθJC(top)	TPS736 New silicon, DBV (SOT-23), 5 PINS	typ 82.9 °C/W	4
Junction-to-board thermal resistance RθJB	TPS736 New silicon, DBV (SOT-23), 5 PINS	typ 53.1 °C/W	4
Junction-to-top characterization parameter ψJT	TPS736 New silicon, DBV (SOT-23), 5 PINS	typ 21.1 °C/W	4
Junction-to-board characterization parameter ψJB	TPS736 New silicon, DBV (SOT-23), 5 PINS	typ 52.7 °C/W	4
Junction-to-ambient thermal resistance RθJA	TPS736 Legacy silicon, DBV (SOT-23), 5 PINS	typ 221.9 °C/W	5
Junction-to-case (top) thermal resistance RθJC(top)	TPS736 Legacy silicon, DBV (SOT-23), 5 PINS	typ 74.9 °C/W	5
Junction-to-board thermal resistance RθJB	TPS736 Legacy silicon, DBV (SOT-23), 5 PINS	typ 51.9 °C/W	5
Junction-to-top characterization parameter ψJT	TPS736 Legacy silicon, DBV (SOT-23), 5 PINS	typ 2.8 °C/W	5
Junction-to-board characterization parameter ψJB	TPS736 Legacy silicon, DBV (SOT-23), 5 PINS	typ 51.1 °C/W	5
Input voltage range VIN	Minimum VIN = VOUT + VDO or 1.7V, whichever is greater	min 1.7 · max 5.5 V	6
Internal reference (TPS73601) VFB	TJ = 25°C	min 1.198 · typ 1.204 · max 1.21 V	6
Accuracy VOUT	Nominal; TJ = 25°C; external resistor tolerance excluded	min -0.5 · max 0.5 %	6
Accuracy VOUT	Over VIN, IOUT, and T; VOUT + 0.5V ≤ VIN ≤ 5.5V; 10mA ≤ IOUT ≤ 400mA; typical ±0.5%; external resistor tolerance excluded	min -1 · typ 0.5 · max 1 %	6
Line regulation ΔVOUT(ΔVIN)	VOUT(nom) + 0.5V ≤ VIN ≤ 5.5V	typ 0.01 %/V	6
Load regulation ΔVOUT(ΔIOUT)	1mA ≤ IOUT ≤ 400mA	typ 0.002 %/mA	6
Load regulation ΔVOUT(ΔIOUT)	10mA ≤ IOUT ≤ 400mA	typ 0.0005 %/mA	6
Dropout voltage VDO	VIN = VOUT(nom) - 0.1V; IOUT = 400mA; not measured for VOUT(nom) < 1.8V	typ 75 · max 200 mV	6
Output impedance in dropout ZO(DO)	1.7V ≤ VIN ≤ VOUT + VDO	typ 0.25 Ω	6
Output current limit ICL	VOUT = 0.9 × VOUT(nom)	min 400 · typ 650 · max 800 mA	6
Output current limit ICL	3.6V ≤ VIN ≤ 4.2V, 0℃ ≤ TJ ≤ 70℃, legacy silicon	min 500 · max 800 mA	6
Output current limit ICL	VOUT = 0.9 × VOUT(nom), new silicon	min 500 · max 800 mA	6
Short-circuit current ISC	VOUT = 0V	typ 450 mA	6
Ground pin current IGND	IOUT = 10mA (IQ), legacy silicon	typ 400 · max 550 uA	6
Ground pin current IGND	IOUT = 10mA (IQ), new silicon	typ 400 · max 630 uA	6
Ground pin current IGND	IOUT = 400mA	typ 800 · max 1000 uA	6
Shutdown current (IGND) ISHDN	VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, –40°C ≤ TJ ≤ 100℃, legacy silicon	typ 0.02 · max 1 uA	6
Shutdown current (IGND) ISHDN	VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, new silicon	typ 0.02 · max 1 uA	6
Feedback pin current (TPS73601) IFB		typ 0.1 · max 0.3 uA	6
Power-supply rejection ratio (ripple rejection) PSRR	f = 100Hz, IOUT = 400mA	typ 58 dB	6
Power-supply rejection ratio (ripple rejection) PSRR	f = 10kHz, IOUT = 400mA	typ 37 dB	6
Startup time tSTR	VOUT = 3V, RL = 30Ω, COUT = 1uF, CNR = 0.01uF	typ 600 us	6
EN pin high (enabled) VEN(high)	Maximum VIN	min 1.7 V	6
EN pin low (shutdown) VEN(low)		min 0 · max 0.5 V	6
Enable pin current (enabled) IEN(high)	VEN = 5.5V	typ 0.02 · max 0.1 uA	6
Thermal shutdown temperature TSD	Shutdown, temperature increasing	typ 160 °C	6
Thermal shutdown temperature TSD	Reset, temperature decreasing	typ 140 °C	6
Operating junction temperature TJ		min -40 · max 125 ℃	6

Pins, by the datasheet

1 IN: Input supply. · p. 3
2 GND: Ground. · p. 3
3 EN: High enables the regulator; low selects shutdown. Connect to IN if unused. · p. 3
4 FB: Control-loop error amplifier input that sets the output voltage of the adjustable version. · p. 3
5 OUT: Regulator output; no output capacitor requirements for stability. · p. 3

Parameters

Current Limit: 650mA
Features: Over Current Protection
Junction Temperature(Max): 150℃
Noise: 30uVrms
Number of Outputs: 1
Operating Temperature: -40℃~+125℃@(Tj)
Output Configuration: Positive
Output Current: 400mA
Output Type: Adjustable
Output Voltage: 1.2V~5.5V
Power Supply Rejection Ratio (PSRR): 58dB@(100Hz)
Reference Voltage: 1.204V
Thermal Resistance(Junction to Ambient): 221.9℃/W
Thermal Resistance(Junction to Board): 53.1℃/W
Thermal Resistance(Junction to Case): 82.9℃/W
Voltage - Supply: 1.7V~5.5V
Voltage - Supply(Absolute Max): 6V
Voltage Dropout: 75mV
standby current: 400uA

Order codes

TPS73601DBVTLCSC C115265
TPS73601DBVRG4LCSC C3747271
TPS73601DBVTG4LCSC C3752363
TPS73601DBVRLCSC C59200

Pinout

The pins of the TPS73601DBV
Pin	Name	Type
1	IN	Power in
2	GND	Power in
3	EN	Input
4	FB	Input
5	OUT	Power out

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/TPS73601DBV" title="TPS73601DBV in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

2 layers133.2 × 75.4 mm
Tsbym
cgxeiji/cgxkb
Build guides and schematics of the CGx Keyboard series.
87 parts83MIT
2 layers342.9 × 109.6 mm
Dynamis
bbrfkr/dynamis-keyboard

199 parts24MIT
2 layers30 × 30.2 mm
Paw3395 breakout board
vnguyen31/PixArt-PAW3395-Breakout-Board
Fully functioning Breakout Board with SPI pin headers for PAW3395 Motion Sensor
28 parts11MIT
2 layers50 × 22.9 mm
RX Module nRF24L01
obbo-pl/RC-RX-NRF24L01
RC receiver with NRF24L01 module and compatible with the CABELL protocol
33 parts3GPL-3.0
2 layers22 × 25 mm
PMW3360
arbope/trackball_pcb
schematic & pcb for the PMW3360 module, kicad 10.0.4
24 parts1
2 layers336.8 × 109.9 mm
Laser keyboard
bbrfkr/laser-keyboard

179 parts1
2 layers110 × 94 mm
Akira board
MeltedIceCubes/Akira_Ball
Trackball Inspired by Akira's explosion
68 parts
2 layers22.8 × 24 mm
Pwm3389 pcb edge
svofski/tapeshnik
compact cassette data drive
15 parts14

Parts like it

Questions

Is there a KiCad symbol and footprint for the TPS73601DBV?

Yes. The symbol is Regulator_Linear:TPS73601DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS73601DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS73601DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS73601DBV?

JLCPCB lists it as part C59200, with 27,063 in stock; the sellers' links on this page open their listings.

What can replace the TPS73601DBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the AP2112K-1.8TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS73601DBV?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

TPS73601DBV

Overview

Symbol

Footprint

From the datasheet

What it is and has

Specifications

Pins, by the datasheet

Open-source boards using it

Tsbym

Dynamis

Paw3395 breakout board

RX Module nRF24L01

PMW3360

Laser keyboard

Akira board

Pwm3389 pcb edge

Parts like it

ME6211C33M5G-N

SPX3819M5-L-3-3/TR

RT9013-33GB

AP2112K-1.8TRG1

TLV75533PDBV

TLV75733PDBV

ME6217C33M5G

TPRT9013-33GB