Skip to the content
2 layers67 × 33 mmSteering, the printed circuit board in 3D

Custom Steering + Throttle/Brake Systems & Devboard

Size
67 × 33 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
65
Pads
210
Tracks, vias
562, 51
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Aug 2026
Updated
26 Oct 2026

Overview

Steering is an open-source printed circuit board by AQUA-Warrior, from the AQUA-Warrior/steering-system repository on GitHub. It is a 2-layer board of 67 × 33 mm with 40 parts on 65 nets, routed with 562 tracks and 51 vias.

It is built around the STM32F732RET6, AP2112K-3.3 and USBLC6-2SC6. Its parts include 16 capacitors, 6 connectors, 4 resistors, 3 ICs and 2 diodes. It belongs with the microcontroller boards boards and the STM32 boards of this library.

Main components

3

README

README.md

Custom Steering + Throttle/Brake System & Devboard

If You Want Total Control, You Have To Make It Yourself

Project Overview:

A custom, embedded hardware project to make my very own sim racing steering wheel and pedal systems. The project is powered by the STM32F732RET6 chip, using hall effect sensors for measuring inputs of the steering, throttle, and braking.

Purpose Of The Project:

I started making this project knowing basically nothing about communication protocols or chip architectures. Instead of buying adapters that are already made for you. I wanted to make the entire system myself to learn and expand my knowledge, and create my very own sim racing setup. By designing this myself, I learned the strengths and weaknesses of communication protocols and which ones were best for which purpose. I wired up all the unused GPIO pins on the chip to connectors so that I would not just be locked down to the steering project, but instead, I can use it as a general purpose devboard for any future embedded hardware project I want to do.

The Repository Contains:

  • KiCad schematics and PCB's for the devboard and AS5047P adapter board.
  • STM32CubeMX pinouts for the devboard.
  • This repository contains firmware in the STM32/ folder

Main Board Hardware:

  • Chip: STM32F732RET6 (64-pin)
  • Power: 5V VBUS from the USB-C, regulated to 3V3 using an AP2112k

Main Board Design:

  • 2 Layer PCB
  • Minimum component size of 0603 used
  • Two mounting holes (One on top right, One on bottom left)
  • GND Zone on front copper
  • 3V3 Zone on back copper

AS5047P Adapter Board Design:

  • 1 Layer PCB
  • Minimum component size of 0603 used
  • Two mounting holes (One on top right, One on bottom left)
  • GND Zone on front copper

Visuals

Main Board Schematic:

main_schematic

Main Board PCB:

main_PCB

Main Board 3D View:

main_3D

AS5047P Adapter Board Schematic:

AS5047P_schematic

AS5047P Adapter Board PCB:

AS5047P_PCB

AS5047P Adapter Board 3D View:

AS5047P_3D

Bill Of Materials:

Main Board:

#ReferenceQtyValueManufacturerManufacturer Part #FootprintDescriptionPrice (1 Component)Link
1F11PolyfuseYAGEOSMD0603B050TFFuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolderResettable fuse, polymeric positive temperature coefficient$0.36DigiKey
2SW21SW_SPDTWurth Elektronik4.5E+11450406020024:4504060200249.0 × 3.5 mm, SPDT, ON-ON, Pitch 2.5 mm, Vertical type, SMT, T&R$2.51DigiKey
3D11REDWurth Elektronik150060RS75000LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderLight emitting diode$0.15DigiKey
4U21USBLC6-2SC6STMicroelectronicsUSBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6Very low capacitance ESD protection diode, 2 data-line, SOT-23-6$0.80DigiKey
5U11STM32F732RET6STMicroelectronicsSTM32F732RET6Package_QFP:LQFP-64_10x10mm_P0.5mmSTMicroelectronics Arm Cortex-M7 MCU, 512KB flash, 256KB RAM, 216 MHz, 1.7–3.6V, 50 GPIO, LQFP64$15.43DigiKey
6R41100YAGEORC0402FR-07100RLResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderResistor$0.24DigiKey
7R2, R325.1kYAGEOAC0603FR-135K1LResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderResistor$0.10DigiKey
8R1110kYAGEORC0603FR-1010KLResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderResistor$0.10DigiKey
9FB11120RMurata ElectronicsBLM18AG121SN1DInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderFerrite bead$0.16DigiKey
10C1612.2uFMurata ElectronicsGRT188R61H225KE13DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.20DigiKey
11C11, C12210pFMurata ElectronicsGCM1555C1H100JA16DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.11DigiKey
12C8, C9, C14, C1541uFMurata ElectronicsGRT188C8YA105KE13DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.17DigiKey
13C7110nFMurata ElectronicsGCM188R72A103KA37DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.15DigiKey
14C6, C17210uFMurata ElectronicsGCJ21BR71A106KE01LCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderUnpolarized capacitor$0.74DigiKey
15C1, C2, C3, C4, C5, C106100nFMurata ElectronicsGCM188L81H104KA57DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.14DigiKey
16D21D_TVSKYOCERA AVXGG060305100N2PDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderBidirectional transient-voltage-suppression diode$0.45DigiKey
17Y1116MHzJauch QuartzQ 16,0-JXS32-8-10/10-WA-LFCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingFour pin crystal, GND on pins 2 and 4$0.61DigiKey
18J11USB_C_Receptacle_USB2.0_14PGCTUSB4085-GF-AConnector_USB:USB_C_Receptacle_GCT_USB4085USB 2.0-only 14P Type-C Receptacle connector$0.91DigiKey
19U31AP2112K-3.3Diodes IncorporatedAP2112K-3.3TRG1Package_TO_SOT_SMD:SOT-23-5600mA low dropout linear regulator, with enable pin, 3.8–6V input voltage range, 3.3V fixed positive output, SOT-23-5$0.28DigiKey
20SW11SW_PushAlps AlpineSKSGACE010ul_SKSGACE010:SKSGACE010_ALPSPush button switch, generic, two pins$0.45DigiKey
21J81Conn_01x15_Socket——Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalGeneric connector, single row, 01x15, script generated——
22J71Conn_01x21_Socket——Connector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_VerticalGeneric connector, single row, 01x21, script generated——
23J61Conn_01x02_Socket USART2——Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalGeneric connector, single row, 01x02, script generated——
24J4, J52Conn_01x03_Socket A1324LLHLT-T——Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalGeneric connector, single row, 01x03, script generated——
25J31Conn_01x06_Socket——Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalGeneric connector, single row, 01x06, script generated——
26J21Conn_01x04_Pin——Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalGeneric connector, single row, 01x04, script generated——

AS5048 Adapter Board:

#ReferenceQtyValueManufacturerManufacturer Part #FootprintDescriptionPrice (1 Component)Link
1C11100nFMurata ElectronicsGCM188L81H104KA57DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.14DigiKey
2C211uFMurata ElectronicsGRT188C8YA105KE13DCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderUnpolarized capacitor$0.17DigiKey
3J11Conn_01x07_Socket——Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalGeneric connector, single row, 01x07, script generated——
4U11AS5047PInfineon TechnologiesAS5047P-ATSM-TSSOP14Package_SO:TSSOP-14_4.4x5mm_P0.65mmMagnetic position sensor, 14-bit, PWM output, SPI Interface, TSSOP-14$9.95$DigiKey

Linear Sensor:

#ReferenceQtyValueManufacturerManufacturer Part #FootprintDescriptionPrice (1 Component)Link
1—1—Texas InstrumentsDRV5055A1QLPG—SEN HALL EFFECT ANLG VOLT TO92-3$0.77Digikey

Misc:

#ReferenceQtyValueManufacturerManufacturer Part #FootprintDescriptionPrice (1 Component)Link
1J11TSW-150-07-G-SSamtec Inc.TSW-150-07-G-S—50-position, single-row, through-hole male pin header, 2.54 mm pitch$4.27DigiKey
2—19042Radial Magnets, Inc.9042—Neodymium N35 cylindrical magnet, 6 × 2.5 mm, diametrically magnetized$0.63DigiKey
3—29027Radial Magnets, Inc.9027—Neodymium N35SH cylindrical magnet, 4 × 2.5 mm, axially magnetized$0.40DigiKey

PCB:

ItemCost (USD)
AS5048 Adapter Board PCB$5.20
AS5048 Adapter Board Stencil$7.22
Main Board PCB$3.20
Main Board PCB Stencil$7.22

PCB

Total: $83.79 USD

Total (Including Tax): $94.69 USD

Parts

40
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C10
41uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C9, C14, C15
210pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C12
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6, C17
25.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3
2Conn_01x03_Socket A1324LLHLT-TConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4, J5
1100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
110nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
1120RInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderFB1
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1
12.2uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC16
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1Conn_01x02_Socket USART2Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_01x06_SocketConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1D_TVSDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1PolyfuseFuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolderF1
1REDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1STM32F732RET6Package_QFP:LQFP-64_10x10mm_P0.5mmU1
1SW_Pushul_SKSGACE010:SKSGACE010_ALPSSW1
1SW_SPDT450406020024:450406020024SW2
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4085J1

The 36 most common of 40 parts.

More from AQUA-Warrior/steering-system

1
  • 2 layers18.3 × 19.5 mmAS5047P, the printed circuit board in 3D

    AS5047P

    AQUA-Warrior/steering-system

    Custom Steering + Throttle/Brake Systems & Devboard

    6 parts

Similar boards

  • 2 layers100 × 100 mmUnit base, the printed circuit board in 3D

    Unit base

    shinchiryota/Circuit

    2022以降の回路をまとめる

    175 parts
  • 4 layers60.8 × 61.3 mmOS3M Mouse, the printed circuit board in 3D

    OS3M Mouse

    spoter368/os3m-hardware

    All the hardware needed to build your own OS3M Mouse!

    51 parts399
  • 2 layers390 × 120.2 mmKeyboard, the printed circuit board in 3D

    Keyboard

    joshajohnson/entropy

    Strange keyboard with a left hand numpad

    334 parts97
  • 2 layers89 × 124 mmHub20, the printed circuit board in 3D

    Hub20

    joshajohnson/Hub20

    Hub20 is a numpad with a bunch of features you never knew you needed.

    183 parts68
  • 2 layers84.2 × 100 mmFabpack out v5 8, the printed circuit board in 3D

    Fabpack out v5 8

    yuz207/agentpad13

    agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)

    126 parts41
  • 2 layers80.8 × 30 mmStm32 dev, the printed circuit board in 3D

    Stm32 dev

    brainstorm/bbtrackball-rs

    Experimenting with Blackberry trackball for keyboard ergonomics

    61 parts34
  • 2 layers46.8 × 52 mmUsb dev board, the printed circuit board in 3D

    Usb dev board

    cs2dsb/stm32-usb.rs

    A dev board designed to facilitate the development of USB firmware for STM32

    57 parts30Apache-2.0
  • 2 layers64.3 × 25.4 mmFranzininho WiFi, the printed circuit board in 3D

    Franzininho WiFi

    Franzininho/Franzininho-WiFi

    Franzininho WiFi is a board with ESP32-S2.

    38 parts24

Questions

How big is the Steering PCB?

It measures 67 × 33 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Steering use?

40 parts, built around the STM32F732RET6, AP2112K-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Steering KiCad files?

From the AQUA-Warrior/steering-system repository on GitHub, at the commit this page was made from: the board is KiCad - Main/steering.kicad_pcb and its schematic KiCad - AS5047P adapter/AS5047P.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Steering design in my own project?

Its repository states no licence, so its author keeps all rights: ask AQUA-Warrior before reusing the design.